Hot on the heels of the AMD announcement regarding socketed Kabini systems, ASUS has released information on two of their main contenders in this segment.  While AMD are expecting most motherboards to be in the micro-ATX form factor, at least a few mini-ITX will appear, and ASUS today are announcing at least one of each in the AM1I-A and AM1M-A.


The mini-ITX model uses the FS1b socket (notice only two holes for a CPU cooler), with two DDR3-DIMM slots and two SATA 6 Gbps ports.  The 4-pin CPU power connector is near the edge of the motherboard (to stop cables being passed over components), and similar to other ASUS mini-ITX motherboards the 24-pin ATX power connector is also on the edge.  Although AMD’s initial AM1 announcement put the maximum DRAM capacity at 16GB, ASUS are claiming 32GB DRAM maximum capacity when 16GB UDIMMs are launched.

The motherboard uses Realtek Audio and NIC (ALC887 and 8111GR), with a PCIe 2.0 x4 slot, a HDMI output, a DVI-D output, two USB 3.0 ports, eight USB 2.0 ports (4 rear, 2 headers), a TPM header and two COM ports (1 rear, 1 header).  ASUS features such as the graphical BIOS, DIGI+ VRM, USB 3.0 Boost and AI Suite 3 are also present.


Using the larger micro-ATX form factor with a SoC that only has four PCIe 2.0 lanes might seem a little odd, but it does give the manufacturer space to add some other extra features, as well as cater for users that want more than one PCIe device.  The main focus of the AM1M-A will be on the two PCIe 2.0 x1 slots below the PCIe 2.0 x4 slot. As the SoC is limited to four lanes, the way around this is to either use a switch, or selectively use one or the other.  ASUS has gone for almost a mix, whereby the user can select the speed of the first black PCIe slot to x1, x2 or x4 accordingly.

The makeup of the AM1M-A is similar to the mini-ITX model – HDMI output, DVI-D output, VGA output, Realtek audio and NIC (ALC887-VD and 8111GR), two SATA 6 Gbps, four USB 3.0 ports (two rear, one header powered by an ASMedia controller), eight USB 2.0 ports (4 rear, 2 headers), a TPM header and a COM header.  The AM1M-A also benefits from the ASUS graphical BIOS, USB 3.0 Boost, Fan Xpert, DIGI+ VRM and AI Suite 3.

With the use of a USB 3.0 controller onboard, there has to be some clever allocation of PCIe lanes to make it work.  Chances are that the full length PCIe x16 slot runs at x4 when the two PCIe x1 slots and the internal USB 3.0 ports are not used.  The moment one of them is in use, the full length slot becomes an x1 to release the bandwidth.  The allocation would most likely happen at boot time, making the setting an option in the BIOS to enable or disable.  I am asking ASUS which setting is default, though I would imagine the USB ports being enabled is the default setting to allow users to plug everything in.  This means that if you need specifically a PCIe 2.0 x4, then it has to be enabled in the BIOS.

Using the chipset diagram for Kabini:

We see that the USB 3.0 controller is using one of the x1 PCIe lanes normally geared for the Wi-Fi controller.  It would therefore look like that the PCIe 2.0 x4 and the two PCIe 2.0 x1 slots are also independent, such that the SoC actually has eight PCIe 2.0 lanes for use, but only as one set of four and four sets of one.

We are still unsure if AMD’s $60 price point is the ultra-low end objective of the AM1 platform (APU + motherboard) or the high end.  Pricing from ASUS is TBD, but both boards should be available when the platform is launched on April 9th.

Comments Locked


View All Comments

  • madgabz - Thursday, March 6, 2014 - link

    It doesnt make sense with this board, because the price of a proper pci card with needed sata ports are much higher than finding a similar motherboard with 6+ builtin sata ports, and perhaps even more pci ports for expanding. If it is powerful enough, yes ofc, you can do perfectly nice NAS using Nas4free on an old Atom-based mobo
  • toyotabedzrock - Wednesday, March 5, 2014 - link

    Is there h264 encoding acceleration in this platform? The bay trail from Intel lists it as having quicksync.
  • Edgar_Wibeau - Thursday, March 6, 2014 - link

    Both boards are listet in Germany for sub €29 incl. VAT, that would be sub $33 sans VAT currently. Erm, no URLs possble here? Geizhals de -> Mainboards -> AMD Sockel AM1
  • fteoath64 - Thursday, March 6, 2014 - link

    Pity the performance is so puny for a quad core. AM should have used a downclocked SR dual-core, with its dual channel memory, then slap 4 sata ports and reduce the number of USB2 ports, ditch one mini-PCIe slots and use 192 GPU cores instead. That might bring it to 30w but it will make a huge difference in performance compared to BayTrial. AT least if it had 4 sata ports, it could be a good home NAS candidate.
  • Master_of_puppets - Sunday, March 9, 2014 - link

    you're right, it's gonna be very good candidate for home NAS!
  • extremesheep49 - Sunday, March 9, 2014 - link

    I know the pricing is uncertain yet but I suppose this could make the "Gizmo Explorer" obsolete or at least come down in value. I know the Gizmo comes with power cables and other accessories but a $60 CPU/Motherboard combo + extra stuff shouldn't be $200.

Log in

Don't have an account? Sign up now