Direct-Attached Storage Performance

Evaluation of DAS units on Windows is done with the testbed outlined in the table below. We had started evaluation with the older Haswell-based testbed, since it has Thunderbolt 2 support. Eventually, we learnt during the course of evaluation that the Drobo 5D's Thunderbolt ports are useless when the unit is used with PCs / Windows. Despite this, we continued and completed our evaluation using the USB 3.0 interface on the same testbed. We utilize the USB 3.0 port directly from the Z97 PCH.

AnandTech DAS Testbed Configuration
Motherboard Asus Z97-PRO Wi-Fi ac ATX
CPU Intel Core i7-4790
Memory Corsair Vengeance Pro CMY32GX3M4A2133C11
32 GB (4x 8GB)
DDR3-2133 @ 11-11-11-27
OS Drive Seagate 600 Pro 400 GB
SATA Devices Asus BW-16D1HT 16x Blu-ray Write (w/ M-Disc Support)
Add-on Card Asus Thunderbolt EX II
Chassis Corsair Air 540
PSU Corsair AX760i 760 W
OS Windows 10 Pro x64
Thanks to Asus and Corsair for the build components

The full details of the reasoning behind choosing the above build components can be found here. The list of Drobo 5D configurations used for comparison purposes is provided below.

  • Drobo 5D SDR Yes mSATA (Single disk redundancy with mSATA acceleration)
  • Drobo 5D SDR No mSATA (Single disk redundancy without mSATA acceleration)
  • Drobo 5D DDR Yes mSATA (Dual disk redundancy with mSATA acceleration)
  • Drobo 5D DDR No mSATA (Dual disk redundancy without mSATA acceleration)

Synthetic Benchmarks - ATTO and Crystal DiskMark

The Drobo 5D delivers best-case numbers of close to 300 MBps writes and 250 MBps reads in the single-disk / mSATA inactive configuration for our standard ATTO benchmarking configuration. Obviously, the benefits of mSATA acceleration don't come out in this quick-and-dirty benchmark. However, we can see that dual-disk redundancy solutions fare a little worse compared to the single-disk redundancy solutions.In any case, these access traces are not very common in real-life scenarios.

CrystalDiskMark, despite being a canned benchmark, provides a better estimate of the performance range with a selected set of numbers. In this case, we can see the sequential access numbers back up the ATTO results. Random access numbers are quite decent for a hard-drive array.

Benchmarks - robocopy and PCMark 8 Storage Bench

Our testing methodology for DAS units also takes into consideration the usual use-case for such devices. The most common usage scenario is transfer of large amounts of photos and videos to and from the unit. Devices like the Drobo 5D are often used to import files directly off the DAS into a multimedia editing program such as Adobe Photoshop.

In order to tackle the first use-case, we created three test folders with the following characteristics:

  • Photos: 15.6 GB collection of 4320 photos (RAW as well as JPEGs) in 61 sub-folders
  • Videos: 16.1 GB collection of 244 videos (MP4 as well as MOVs) in 6 sub-folders
  • BR: 10.7 GB Blu-ray folder structure of the IDT Benchmark Blu-ray (the same that we use in our robocopy tests for NAS systems)

robocopy - Photos Read

robocopy - Photos Write

robocopy - Videos Read

robocopy - Videos Write

robocopy - Blu-ray Folder Read

robocopy - Blu-ray Folder Write

In all the above benchmarks, we see that the mSATA cache acceleration is not useful at all (we are testing out a one-time copy of data to and from the unit). The single-disk redundancy configuration consistently performs better than the dual-disk redundancy option.

For the second use-case, we take advantage of PC Mark 8's storage bench. The storage workload involves games as well as multimedia editing applications. The command line version allows us to cherry-pick storage traces to run on a target drive. We chose the following traces.

  • Adobe Photoshop (Light)
  • Adobe Photoshop (Heavy)
  • Adobe After Effects
  • Adobe Illustrator

Usually, PC Mark 8 reports time to complete the trace, but the detailed log report has the read and write bandwidth figures which we present in our performance graphs. Note that the bandwidth number reported in the results don't involve idle time compression. Results might appear low, but that is part of the workload characteristic.

robocopy - Photoshop Light Read

robocopy - Photoshop Light Write

robocopy - Photoshop Heavy Read

robocopy - Photoshop Heavy Write

robocopy - After Effects Read

robocopy - After Effects Write

robocopy - Illustrator Read

robocopy - Illustrator Write

In the real-world work traces, we can see the real benefit of the mSATA SSD cache acceleration. Writes don't benefit much, but, in the read workloads, we can see that the mSATA SSD-enabled configurations often provide almost double the performance of a raw hard-drive array.

Introduction and Setup Impressions Miscellaneous Aspects and Concluding Remarks
POST A COMMENT

74 Comments

View All Comments

  • Mgamerz - Thursday, May 5, 2016 - link

    I have a Drobo 5D, had it for a few years now. It's not really worth it IMO. Here's why:

    1) The thing is damn slow. While windows asks a sleeping drobo to wake up, sometimes it can lock the entire system up as it waits for a response. Since this thing has 5 disks thats like 20 seconds, and it happens multiple times a day. And I only use it for storage, I don't actively use it. I can get like 70MB/s out of it.

    2) You can't get data off if it dies. And I've had mine crap out once in less than 3 years of ownership where it dropped some piece of data, and windows could no longer read the filesystem.

    3) If you use Windows Image Backup to it, it apparently causes issues with the system booting. I have mine (8TB configuration) and I cannot boot my laptop with it plugged into my Dell Docking Station. I have to push power, pop my machine off the dock, wait for it to finish UEFI boot, then put it back on, or it just locks up. This may not be the fault of the drobo (I see it at home with a 4TB drive, but they're both GPT/UEFI setups...) but its really inconvenient.

    For the price of this (and the fact that once the warranty goes out you can't even get repair service done!) it's not worth it at all. It's fancy, but its not useful fancy.
    Reply
  • devildahusky - Saturday, May 7, 2016 - link

    I had a Drobo once. It deleted all my data and the company refused to provide recovery or acknowledge a problem with the device. Money well wasted. Reply
  • aj654987 - Thursday, May 12, 2016 - link

    This "review" reads like an advertisement. $600 for this thing and nowhere does the review compare it to its competitors or tell me why I should buy this thing over a Qnap device. Anandtech was so much better when they were independent. Reply
  • CalaverasGrande - Tuesday, June 14, 2016 - link

    I have a Drobo I use for my photos and misc stuff. It has been rock solid for the last couple years. It is slow as hell, and I'd really resent the unit if I hadn't gotten a great price on it. Honestly I only picked it up because of the deal, and all the NAS I looked at had too many gimmicky features I didn't care for.
    Recently replaced it with an OWC Thunderbay 4. MUCH faster.
    Reply

Log in

Don't have an account? Sign up now