The battle between HomePlug and HomeGrid to emerge as the de-facto powerline networking standard was quite interesting between 2010 and 2013. However, despite silicon getting demonstrated at various trade shows, HomeGrid's G.hn was unable to get a retail product out for a long time. This changed last summer with the introduction of the Comtrend PG-9172, a 1200 Mbps G.hn powerline adapter.

Background

We have covered powerline networking on-and-off over the last five years. Around the 2012 time-frame, there was a big tussle going on between HomePlug and HomeGrid to emerge as the standard for powerline communication. HomePlug has been enjoying a lot of success over the last decade as the incumbent with a huge install base (both amongst service providers and retail consumers). Sigma Designs impressed us with multiple silicon demonstrations back in 2011. This was followed by Marvell throwing its hat in the ring later that year. However, despite multiple launches following up, HomeGrid's G.hn never appeared to gain traction.

At CES 2014, I had the chance to talk with the people from both HomePlug and HomeGrid. Following that, I completely wrote off G.hn's chances in the retail powerline communication market. My reasons were pretty clear - three years after launch of the first generation silicon from multiple vendors, they had no retail product to show. There were no major updates at CES 2015 either, and I thought HomePlug had sealed the deal to be the de-facto powerline standard.

Throughout this time, G.hn appeared to be gaining traction amongst service providers, but there appeared to be no significant deployment. Things started changing in 2015. Last year, Comtrend introduced the first G.hn product in the retail channel in the US market. We have had the review units for close to a year now. Despite doing some initial benchmarking last year, we were hesitant to carry out a full-length review with just benchmarks from the PG-9172 alone. Another reason was that the Comtrend PG-9172 was a standalone product, and couldn't inter-operate with the large number of HomePlug products already in the market. It was hard to judge the value of a product that had to rely on support from a non-Tier-1 vendor. A few weeks back, ARRIS (famous for its SURFboard cable modems after the 2013 purchase of the Motorola Home division) introduced the RipCurrent range of networking products utilizing G.hn technology. Suddenly, we could look at the Comtrend PG-9172 in a whole new light. A growing G.hn retail ecosystem meant that it was time to dust off the powerline adapters and look at the comparative performance of the PG-9172 against various solutions from the HomePlug stable.

Comtrend PG-9172: Features and Usage Impressions

The Comtrend PG-9172 is a powerline adapter based on G.hn technology. Prior to its launch, all retail powerline adapters had been based on HomePlug technology. Readers looking for some background on HomePlug and G.hn would do well to peruse our first powerline networking kit review and our subsequent coverage of the tussle between HomePlug and G.hn.

The Comtrend PG-9172, like other powerline adapters, uses existing electrical wiring and powerline technology to connect devices at wired speeds without rewiring with Ethernet. Comtrend claims that the G.hn technology in the PG-9172 helps it deliver better real-world performance compared to HomePlug AV2 standards. It features MIMO (multiple-input, multiple-output) technology and supports encryption for secure communication.

The PG-9172 is available as a single adapter. Obviously, one needs a minimum of two adapters to create a powerline network, and our review kit came with two units. Each package has an adapter, a Cat5 Ethernet cable, and a brief installation guide.

In order to support MIMO, the adapter makes use of the ground pin also. The rear side of the unit sports the HomeGrid certification logo. The bottom of the unit contains the RJ-45 port and a configuration reset button. The front side of the adapter contains LEDs to indicate power status, Ethernet link status and encryption status. Each adapter has dimensions of 93mm x 59.6mm x 35mm and weighs 100g.

The Comtrend PG-9172 is based on a Marvell platform. It uses the Marvell 88LX3142 for the G.hn digital baseband functionality and a Marvell 88LX2718 Analog Front End (AFE) chip. The platform features 128-bit AES encryption, and has a PHY rate of 1200 Mbps.

Using the adapter is a simple plug-and-play process. One plugged-in adapter is connected to the router / DHCP server, while the other adapter(s) can be connected to power outlets anywhere in the house. A maximum of 7 other adapters can be part of a G.hn powerline network, as per the specifications of the PG-9172. Most consumers can use the PG-9172 kits to extend their wired network in this manner without worrying about anything else.

Firmware upgrades are managed by the PG-9172 Upgrade Tool available for download on Comtrend's product page. Unfortunately, I never got the upgrade tool to work properly on any of the multiple machines I tried out. Consumers with technical awareness can also manage the adapters via a HTTP interface. This interface can be accessed by setting a static IP in the 10.10.1.0 subnet for the PC's network port connected to the PG-9172 unit. The adapter's web UI can then be accessed at 10.10.1.69 with the password 'paterna'.

The web configuration page provides essential statistics such as PHY rates. It also allows the user to enter a encryption passphrase. We find that power saving / inactivity detection mode is disabled by default. The firmware version can also be verified, and upgraded using FTP / TFTP. Unfortunately, direct upgrade of firmware via the web UI is not available. Advanced users can also configure multicast features, QoS and VLANs using the web UI.

Evaluation Setup and Testing Methodology
POST A COMMENT

48 Comments

View All Comments

  • FATCamaro - Tuesday, May 3, 2016 - link

    There are curbside transformers that would completely mangle any data on the line for internet. I'm sure you've seen these buzzing boxes around you? Reply
  • Manch - Wednesday, May 4, 2016 - link

    A long time ago there was research into using power lines for data transmission. The idea was to use the em field around the lines to carry the signal. Spurious signals can be picked up like this so why not intentionally use it to send/receive data.That research laid the ground work which turned into this tech. Reply
  • GTVic - Wednesday, May 4, 2016 - link

    That is called native encryption. Reply
  • willis936 - Tuesday, May 3, 2016 - link

    Phone lines have much better properties for signals. Also every house in America already has a phone line thanks to the Communications Act. Reply
  • cigar3tte - Tuesday, May 3, 2016 - link

    But older homes are also that ones that don't have the proper wirings to support powerline networking. Reply
  • Ninhalem - Tuesday, May 3, 2016 - link

    I used power line networking to great effect in a home built in 1892. Wiring is dependent on how good the builders were at the time. You can have modern home builders and electricians who shouldn't have been allowed to touch power tools. I find that most construction from the turn of the 20th century and in the 1930's was some of the best construction ever. Reply
  • JoeyJoJo123 - Tuesday, May 3, 2016 - link

    What is "Anectdotal Evidence" for $5000, Jerry. Reply
  • Samus - Tuesday, May 3, 2016 - link

    LOL, are you denying his claim that pre-WWII construction was superior to modern construction quality?

    Having a major in architecture and having worked in construction, most modern residential homes are built to last 30-50 years. Materials and quality of construction. The only advantage is the homes are more efficient and have more creature comforts.

    In the 20's and 30's, that mentality didn't exist. Things were just built. Well.

    Prior to the 70's, the concept of "flipping" also didn't exist. Homes were built and bought to live in forever, much of the time planned to be passed down through the family. These days, almost half of homes are purchased for short term occupancy. aka, 'flipping.'

    Buying modern construction is scary, especially if you don't know what to look out for. I'd rather have a 100 year old used and abused home than a 10 year old cookie cutter that was built cheap and has already been through 3 clueless owners.
    Reply
  • sor - Wednesday, May 4, 2016 - link

    I don't know. I've seen my fair share of knob and tube, insulation that has settled and compacted, moisture barrier issues, rot, insufficient foundations. Most homes that are that old have already had major work done or are piles of crap that either need to be stripped to the studs or they're just run down homes that people put up with because of cost. You can find the occasional well built home, but since building code and inspections were sparse it's a total crap shoot. Looking at the past thinking everything was well built is looking with Rose colored glasses. Reply
  • eek2121 - Wednesday, May 4, 2016 - link

    Took the words right out of my mouth. Reply

Log in

Don't have an account? Sign up now