Intel Acquires Rivet Networks: Killer Networking is all in for Team Blue
by Dr. Ian Cutress on May 20, 2020 4:00 PM EST- Posted in
- Networking
- Intel
- Killer
- Rivet Networks
- Wi-Fi 6
- Gigabit Ethernet
News hot off the wire is that Rivet Networks, the company behind the Killer range of accelerated networking products and analysis tools, is being acquired by Intel. The two companies have been working very closely of late, using a unified silicon strategy for the latest gigabit Ethernet networking silicon and also Wi-Fi 6 add-in cards and CNVi CRF modules for laptops. This new acquisition for Intel will enable an element of Ethernet traffic monitoring and optimization the portfolio has not had before, but it will be interesting to see how Intel hands the acquisition compared to when Qualcomm Atheros acquired Rivet Networks some years ago.
A lot of technology savvy users that have been around a while know about the Killer brand of networking products. The company originally burst onto the scene with an FPGA and a big heavy K heatsink looking to offer lower PC-to-Internet latencies, especially in games. Over time that FPGA became its own ASIC and gigabit Ethernet controller, and the company moved more into the ability to transparently detect and shape networking traffic, allowing high-priority traffic to pass through with the lowest latency, but downloads and streaming to get the lowest latency. Users were able to configure their network, as well as direct traffic through different networking interfaces if two Killer products were supported.
The original Bigfoot Killer NIC in 2006
The company originally started as Bigfoot Networks, and came to market with the Killer NIC in 2006. Qualcomm’s Atheros division, focused on networking, acquired the company in September 2011. The acquisition with Qualcomm gave a lot of access to Qualcomm’s ASIC building capabilities, bringing the power of the NIC down from an FPGA but also increasing the capability of the hardware and software. However, after several years of no product development or generational iterations, the original founders and engineers of the company spun back out of Qualcomm to form Rivet Networks, in an effort to build the Killer branding once again. Originally working with Qualcomm’s Atheros silicon, Rivet Networks started partnering with Intel and Realtek on various parts offering a standard version under the normal brand or the Killer version with additional network detection and shaping capabilities. This led to a resurgence in the capabilities of the hardware, with Dell, MSI, GIGABYTE, ASRock, and other OEMs becoming customers.
The Rivet Networks Killer AX1650, already built on Intel AX200 Silicon
When we saw a Killer NIC in the Dell XPS, the company had truly made it. Dell’s business machines also got access to SmartByte, a special app detection algorithm for Dell end-users and business customers. Rivet Networks have also developed a number of technologies to its portfolio, including supporting switch-like mechanics for multi-controller systems, or Wi-Fi extension services through time-muxing the Wi-Fi modem.
All these technologies will now fall under the Intel umbrella. The Rivet Networks team will join Intel’s Wireless Solutions Group within the Client Computing Group. Given that the two groups have been working very closely with the AX201 and Killer AX1650 networking chips recently, which underneath both use Intel silicon, it will be interesting to see where it all goes from here. I know of a number of plans that the Rivet team were working towards, some of them would be very beneficial to the consumer market, so I hope that Intel keeps the same passion alive.
This news is still breaking, we will update as we get more information
I had an on-the-record call with the Rivet Networks team and Intel, with lots of interesting information. While the value of the acquisition is not being disclosed, talks started in earnest at the end of last year about the right time and the level of synergy between the two companies. There is no mention of personnel, however every person that Intel offered a position too at Rivet took that offer. Rivet's CEO Mike Cubbage will now be Intel's Senior Director of Connectivity Innovations.
Intel is set to keep the Killer brand and integrate it into its portfolio of products. I asked if there were any particular brands that Intel was keen on or not keen on - Intel's Eric McLaughlin, VP and GM of the Wireless Group stated that Intel is interested in all of them, especially in how they've been deployed so far and how Intel can scale them in more places and different ways.
I did ask a question about the integration, given how when Rivet/Bigfoot Networks was acquired by Qualcomm and then had to spin out again in order to drive the product, I was worried Intel might do the same. Mike told me that Rivet's Killer brand strengths back then, and even today, are in the PC and Gaming space, which perfectly aligns with what Intel is focused on. This is different to the previous acquisition, where is was more of a business portfolio play, but this time around Intel looks set on developing the Killer technology into a wide variety of products at scale, something which Rivet wasn't able to do previously.
Source: Intel
64 Comments
View All Comments
CheapSushi - Wednesday, May 20, 2020 - link
Unless you actually have driver issues, what's the point? People far too easily don't give anything other than generic stuff a chance. That's why there's so little innovation or interesting ideas aside from the same tired CPU and GPU brand launches.Reflex - Thursday, May 21, 2020 - link
I actually have their latest in my laptop (Dell XPS13) and consistently had lockups with the Killer driver especially when doing any heavy network transfers. Switching to Intel fixed it.Also, Killer's purported features make very little sense, most of what they claim couldn't work without AP's and switches that support those features. And their service is a potential security risk.
FXi - Thursday, May 21, 2020 - link
Reflex I hear and solve stories like yours on a very regular basis. I move all current stuff to Intel drivers only.Reflex - Thursday, May 21, 2020 - link
I've moved literally every system I've found with Killer drivers over to generic Intel with always positive results. Plus you get to remove that useless service they install.Makaveli - Thursday, May 21, 2020 - link
I think because when its comes to networking Stability is king over performance and features as long as the latter two are at an acceptable level.PeachNCream - Thursday, May 21, 2020 - link
If you buy a modern Killer NIC you end up with Intel hardware which accepts standard Intel drivers because it what Rivet Networks has brought to the table is just a software stack that doesn't actually do anything useful. It makes grandiose claims, but without network awareness (for which there hasn't been in the over 15 years the company has been changing hands between various corporate owners), there is nothing it does that is actually helpful. Its simpler and easier to just get an Intel-branded network adapter and forget that Killer NICs exist.Intel must have gotten the company for nearly no cost if they were even willing to obtain the brand name given its reputation for selling non-performance-enhancing software and their storied past of lousy, skittish drivers. I think the only person Rivet Networks managed to really dupe into going all in on the company was Ian Cutress since he used to really prop up the company's software year ago until we in the comments box started demanding supporting benchmark data (which he never has been able to provide) and backed him off it a bit.
yeeeeman - Thursday, May 21, 2020 - link
At least in the wireless department, Intel is doing pretty well and I wouldn't call it stagnant. Wi-Fi cards are built by adhering to a spec and the speeds that AX Intel cards reach nowadays are pretty much in line with what the spec says.Still, next gen (wifi 7) will bring a LOT more improvements, I can tell you that.
FXi - Thursday, May 21, 2020 - link
And to reinforce that, Intel has consistently brought the first client cards in both the Wifi 5 and Wifi 6 generations, so they have helped each time to move the industry forward. Could they be more feature laden? Yes maybe. But I'm in the camp of wanting as little trouble as possible in networking gear vs special features. It's one less place to worry when you are trying to solve a network influenced performance issue.Reflex - Wednesday, May 20, 2020 - link
10GigE hasn't taken off because of power requirements. Not worth it for what it brings to the table for the vast majority of users. 2.5Gbit is now becoming a thing to avoid the power consumption of 10Gig.SteveX107 - Thursday, May 21, 2020 - link
That's true. I don't see the point in using a 10GigE when your network doesn't reach even half of the speed.