Assembling the BitFenix Shinobi XL

While it's easy to complain about BitFenix utilizing a very common design language for the interior of the Shinobi XL, it must be said that this design language also makes assembly a relatively painless process. BitFenix ships the Shinobi XL with the motherboard standoffs already installed in the tray, and the toolless design is largely flawless.

Where I did run into problems is that the motherboard tray itself is missing a hole for a standoff for the Micro-ATX motherboard we use for our testbed. It's not catastrophic, but it does result in a little bit of flex when connecting the case headers to the motherboard. Worth mentioning is that the Shinobi XL doesn't need separate USB 3.0-to-2.0 header adaptors; each USB 3.0 header cable comes with a built-in USB 2.0 header. Since boards with two onboard USB 3.0 headers are pretty rarefied, this is appreciated, though on the flipside it may be difficult at first to figure out which of your USB 3.0 ports are running at 3.0 and which are stuck at 2.0. Note also that the yellow USB port on the top of the case has no data header; instead it just has a SATA power lead (and I appreciate their use of SATA instead of molex).

Installing any kind of drive in the Shinobi XL is a largely painless process, too. The drive trays feature pins on the sides that bend and snap into 3.5" drives while also featuring holes in the bottom for mounting 2.5" drives. The toolless clamps for the 5.25" bays are a little more confusing and require consulting the manual, but you can eschew them entirely and just use screws to secure the drives as well. Expansion cards are just as easy, using the familiar thumbscrews.

Getting the power supply in was easy as well, although one of the screw holes on the PSU didn't quite line up. BitFenix actually has four rubber standoffs the power supply sits on as well as indentations in the motherboard tray that help line up the PSU, making it easy to fit in any standard sized unit.

That's why it's unfortunate that when it comes time to cable the Shinobi XL, everything goes to pot. It's not absolutely awful, but the routing holes in the motherboard tray are frankly just too small and the spacing feels off. There's plenty of space behind the tray, but getting cables back there is another matter entirely, as each of the holes is a fairly tight fit. It doesn't seem so bad at first glance and you can definitely make it work, but the instant you start putting together a fairly busy system (e.g. multiple drives, multiple video cards), I can see things getting very complicated in a hurry.

The interior of the Shinobi XL just isn't that exciting, but outside of the cabling issues it comes together fairly well. Unfortunately, there are other cases in the Shinobi XL's price range (and cheaper) that are easier to put together. I get the distinct feeling this enclosure just isn't going to shine unless it's supporting a proper custom water-cooling rig.

In and Around the BitFenix Shinobi XL Testing Methodology
Comments Locked

29 Comments

View All Comments

  • Dustin Sklavos - Tuesday, June 26, 2012 - link

    I've thought about it a few times. It's just a matter of one of the case manufacturers being crazy enough to let me come up with something. ;)
  • romany8806 - Tuesday, June 26, 2012 - link

    Hey Dustin, I enjoy your reviews more and read them more thoroughly than any others on Anandtech, despite not currently being in the market for anything you've covered.

    I don't suppose you have a CM690-II in your review backlog do you? I'd love to know how my case compares with those that have gone through your new test suite. If you have any anecdotal experience to share I'd be happy with that.
  • Dustin Sklavos - Tuesday, June 26, 2012 - link

    I wish I did, but for some odd reason CoolerMaster stuff can be a bit hard to come by around here and I don't have any business requesting new kit until I've cleared out my (massive) backlog.

    So unfortunately no anecdotal experience, but just from looking at it I'd expect it to perform comparably to Antec's 1100, albeit probably a bit louder.

    I sincerely appreciate the kind words, though. The internet breeds negativity, so it's always nice when someone chooses to put something positive out there. :)
  • Darkhynde - Wednesday, June 27, 2012 - link

    I have to agree with his high opinion of your reviews. It saddens me to hear that the Cooler Master stuff is hard to come by as I am in the early stages of researching parts fro a new build I want to by myself for my birthday in about two months and had my eyes on the Cooler Master HAF XM. My current case is an OLD OLD OLD Thermaltake Kandalf circa 2003 that has served me well through my last two or three builds since then.

    Out of curiosity, just what do you consider massive when you mention this massive backlog of yours? Can We get a ballpark figure of how many cases are in your backlog?

    One other question. What do you do with the cases once they are reviewed and the data recorded for future use. Do you have a room stock piled with cases or do you ship them back to the vendor that supplied them?
  • Dustin Sklavos - Wednesday, June 27, 2012 - link

    Right now my backlog is about six cases deep, so basically about two months worth of reviews. Also keep in mind that as new cases are released, they get moved to the front of the line, so unfortunately when something is sitting at the back...it tends to sit at the back for a long time, potentially indefinitely. I do my best to keep up on my workload, though, and maintain contact with the vendors.

    And also keep in mind that, as you've seen, cases aren't the only thing I handle around here. They keep me busy. :)
  • JarredWalton - Wednesday, June 27, 2012 - link

    Silence, slave! Back to work! [Cracks whip]
  • Dustin Sklavos - Wednesday, June 27, 2012 - link

    Yes sir! Right away sir!
  • xaviergzz - Thursday, June 28, 2012 - link

    "as the case is capable of supporting a cumulative 1080x120mm of radiators"

    what does that mean???

    1080x120mm...1080mm X 120mm ...3 three foot long rad???
  • Galcobar - Thursday, June 28, 2012 - link

    The key phrase is "cumulative."

    Dustin's not explicit about the location of the radiators -- as far as I can read -- but if fan mounts = radiator mounts, then three 120 mm x 120 mm across the top, three across the front, two on the bottom and one at the back.

    120 x 9 = 1080 mm. So nine radiators, 120 mm wide, lined up would produce a 3.5-foot-long radiator.

Log in

Don't have an account? Sign up now