It seems that the larger the panel on a display I review, the brighter the display can get. I always expect the opposite, as lighting more screen would take more and more power. So far, that has not been the case. The VUE 30 is plenty bright, but not as blindingly bright as many other large displays. When I crank the brightness to maximum I measure 277 cd/m2 of brightness on a pure white screen. Moving the brightness to minimum drops this down to 77 cd/m2, which is below the 80 cd/m2 I like the minimum to fall under. This should provide plenty of range for most users.

White Level -  XRite i1Pro and i1DisplayPro

With a black screen, we see a black level of 0.126 cd/m2 with the backlight at the minimum level. With the backlight to maximum this jumps up to 0.45 cd/m2. This level is very much in line with other computer monitors. I won’t fault Nixeus for this, but I’m always surprised at the level of black that is accepted with PC monitors that isn’t acceptable with TVs. Modern plasma displays can produce black levels of 0.006 cd/m2 under the same test conditions, and modern LCDs can hit 0.05 cd/m2 as well. I understand why plasma isn’t used for a PC display, but I’d like to see all vendors work on their black levels going forward. Basically, this panel seems similar to the 30" IPS displays we tested over five years ago; it's just half the price now.

Black Level -  XRite i1Pro and i1DisplayPro

These numbers provide us with a contrast ratio of just 610:1 on average. This falls well behind the Dell U3014 and ASUS PQ321Q displays, which are the most recently reviewed 30”+ displays I have data for. Those both cost a lot more, but being close to 600:1 is a disappointment to me.

Contrast Ratio -  XRite i1Pro and i1DisplayPro

With those basic measures out of the way, it was time to see how accurate the VUE 30 is.

Introduction, Design and Specs sRGB Measurements
POST A COMMENT

95 Comments

View All Comments

  • cheinonen - Tuesday, August 20, 2013 - link

    I probably need to have a Cut-and-Paste note for the lag section at this point. I was using SMTT which worked reasonably well, but no longer is selling licenses and mine has long expired now. Mirroring a counter can have issues, but the main one is there isn't a CRT I can reasonably buy that does beyond 1920x1200 (since I'm moving into the world of Barco and Sony 9" CRT projectors that cost a ton and take up far too much room) so then I have to scale the video input anyway. All the lag testers, like the Leo Bodnar, are designed around TVs so they cap at 1080p for output right now.

    Hopefully with 4K TVs coming out there will be someone that makes a lag tester that uses HDMI 1.4a and can run at multiple resolutions, but it doesn't exist yet. All other lag measurement methods use oscilloscopes and custom software, which is beyond what I can manage at the moment. The Leo Bodnar is far from ideal for this, but it's the best of a bad situation. For monitors that allow direct 1:1 input, I always measure that mode and not a scaled mode. Often I find the differences are only 1-2ms, though, so the scaler really isn't adding that much of an impact.
    Reply
  • ZeDestructor - Tuesday, August 20, 2013 - link

    Thanks for the clarification.

    That aside, scopes aren't too expensive.. I mean, a bunch of my friends (Uni students) bought a bunch of Rigol scopes (around 300AUD each) just so they didn't have to trek down to uni for working on their projects. Sure, you can get really expensive ones well into the thousands range, but last I checked a few weeks ago from reading TFTCentral's reviews, a USB scope is in the €300 range, which IMO isn't bad at all considering the sheer datalogging you can do from a computer vs an independent scope...
    Reply
  • AnnonymousCoward - Thursday, August 22, 2013 - link

    Wouldn't you rather have a Copy-and-Paste note? If you Cut you'd lose it after the first usage! Reply
  • piroroadkill - Tuesday, August 20, 2013 - link

    It's not cheap enough to make me want to buy it over a 30" Dell.

    The fit and finish and look of this is so ultra-cheap. A bit of decent quality matte plastic and a stand that isn't terrible wouldn't break the bank, but it would make this look worth the money they're charging.
    Reply
  • ZeDestructor - Tuesday, August 20, 2013 - link

    TBH, all they really needed to do was skip glossy anything.. a simple, flat, square matte bezel and all would be good in the world... Reply
  • spat55 - Tuesday, August 20, 2013 - link

    Funny thing is this has the same OSD as my DGM (Digimate) 27" 1440p monitor. Really nice quality, but I have heard bad things about the power supplies going bang, but I have had mine for 4 months so hopefully I will be good and have a decent batch. Reply
  • coolhardware - Tuesday, August 20, 2013 - link

    Crazy timing, I just ordered a 27" 2560x1440 Korean made display last night. It was a hair over $300 at Amazon (shortened URL: http://goo.gl/zU4E3x ) and I was shocked that it was so cheap. It is no frills, with Dual Link DVI as the only interface but that is my preferred interface anyway. :-)

    As for size:
    30" 2560x1600 = 404.49 square inches (25.4″x15.9″)
    27" 2560x1440 = 311.5 square inches (23.5″x13.2″)
    So for $300 for a 27" model you get 77% of the display area of the $700 30" model... not bad!
    (Source: Pixensity.com Desktop LCD List)

    After reading this review I am glad that I did not get a 30" Korean model as it looks like there is still some improvements to be made and that price is still very high. I agree with the article and other commenters that a Dell 30" (or similar) may still be preferred and I am looking forward to comparing the new 27" display to my old standby the Dell 3007WFP (from way back in 2005!)
    Reply
  • Nfarce - Wednesday, August 21, 2013 - link

    Good luck. Those inexpensive Korean knock-offs have a high rate of QC issues, from dust/dirt inside the display to plenty of dead pixels and uneven LCD mounting inside the bezel. I just dropped $699 on an LG 27EA83-D at Fry's and am seriously thinking of returning it and getting a 30" Dell U3014 direct from Dell for $999 on sale all month with a coupon code. The LG is great but not as big a leap from my 24" 1920x1200 Samsung as expected, even with the higher resolution. Reply
  • peterfares - Wednesday, August 21, 2013 - link

    I've had a cheapo Korean for over a year now. Paid $290 for it shipped to my door. Sits next to my Dell U3011. Not a single issue. No defective pixels, either.

    Don't buy a model with edge-to-edge glass and you won't have any dust in your screen. Glass=glare and is stupid anyways.
    Reply
  • dlang1234 - Tuesday, August 20, 2013 - link

    I don't understand why you haven't tested the MonoPrice version of the monitors considering they are around the same price range.
    30" IPS Crystal Pro Monitor $797.50

    http://www.monoprice.com/products/product.asp?c_id...
    Reply

Log in

Don't have an account? Sign up now