​Storage enclosures come in many varieties to target different market segments. They usually have one or more downstream SATA ports, while the uplink might be USB, eSATA, or Thunderbolt. USB is one of the most popular interfaces, and the rapid adoption of Type-C has only strengthened its presence in the low-end and mid-range markets. Within the USB storage enclosure market, device vendors have multiple opportunities to tune their product design for specific use-cases. Today's review will take a look at HighPoint's RocketStor RS6114V, a 4-bay direct-attached storage enclosure backed up by their software RAID stack.


The HighPoint RocketStor RS6114V is a prosumer RAID enclosure. Traditionally, multi-bay storage enclosures that advertise RAID capabilities use hardware RAID. However, the RS6114V is different. HighPoint's aim with the product is to present prosumers with an economical DAS option while also serving to introduce them to their versatile RAID stack.

The RS6114V can accommodate either 2.5" or 3.5" drives, and connects to the computer using a USB 3.1 Gen 2 Type-C port. It has a 250W internal PSU. A Type-C to Type-A cable is bundled with the unit. Screws for installing both 2.5" and 3.5" drives are supplied.

The price point of $300 is achieved by avoiding high-end RAID chips with USB 3.1 Gen 2 bridges. Instead, we have the ASMedia ASM1352R (seen in almost every 2-bay USB 3.1 Gen 2 DAS available in the market) coupled with two SATA port multipliers (1x to 2x) - the ASMedia ASM1092. There is a Xilinx CPLD on the daughterboard too (we are yet to figure out its purpose).

The software RAID management is done via the HighPoint RocketStor RAID Manager software. As far as the RS6114V is concerned, the software is available only for Windows and Mac systems. The software is entirely managed via a browser UI. The configuration access can be secured with a password (off by default), and the port for the web server (7404 by default) can also be modified. The gallery below shows a quick overview of the UI and the options available.

Aspects that differentiate the HighPoint RS6114V from the run-of-the-mill RAID enclosures and OS-provided software RAID include ability to set up emails for event notification, enabling auto rebuild (with continued rebuild even if an error is encountered), and the ability to set the priority for the rebuild process (important due to the software RAID nature of the enclosure).

Setting up a RAID volume can be done using either the wizard (Quick Config.) or the manual way (Advanced Config.). The wizard allows configuration of JBOD, RAID 0, RAID 1, and RAID 5 volumes. The advanced configuration option can be used to create volumes in RAID 10 (in addition to the vanilla modes available through the wizard). Additional flexibility is also available - the existing data in the disks can be retained, or users can opt for a quick initialization. The initialization process can also be set for background or foreground operation. The cache policy (write back or write through) can also be configured. Since the enclosure uses software RAID, the appropriate policy must be chosen keeping in mind the probability of a power failure. The policy is set to write back by default. It can be changed even after the RAID array is created. The block size for the RAID can also be configured (512KB by default, configurable between 16KB and 1MB). The sector size can also be set to 512B (default), 1KB, 2KB, or 4KB.

It is not necessary to use the full capacity of a selected disk for the volume, and certain disks can also be configured as hot spares. The software also allows for online RAID level migration or capacity expansion. The browser UI also includes an event view and a storage health inspector that presents S.M.A.R.T information of the installed disks in an easy to understand manner.

In the rest of this review, we take a look at the performance of the enclosure, but, prior to that, we have the detailed specifications and miscellaneous aspects of the various storage bridges that we have evaluated so far. As is evident, the RocketStor RS6114V stands in a league of its own, despite the absence of hardware RAID.

Comparative Storage Bridges Configurations
Downstream Port 4x SATA III 2x SATA III
Upstream Port USB 3.1 Gen 2 Type-C USB 3.1 Gen 2 Type-C
Bridge Chip ASMedia ASM1352R & 2x ASMedia ASM1092 ASMedia ASM1352R
Power 250W Internal PSU (AC Input: 100-240V, 50-60Hz) 40W (12V @ 3.33A) Power Brick with 150 cm Cable
Use Case Prosumer 4-bay 2.5"/3.5" HDD/SSD RAID Enclosure
Supports RAID 0, RAID 1, JBOD, RAID 5, and RAID 10 configuration with hot spare drives
Supports extensive configurability using the HighPoint RocketStor Manager software
Software RAID performance dependent on host system capabilities
2-bay 2.5"/3.5" HDD/SSD Enclosure
Supports RAID 0, RAID 1, SINGLE (traditional JBOD), and JBOD (traditional SPAN) configuration for the two drives
Supports auto-rebuild in RAID 1 mode as long as power is not turned off after blank drive insertion
Physical Dimensions 214 mm x 134 mm x 220 mm 227 mm x 119 mm x 133 mm
Weight (diskless) 5900 grams 1300 grams
Cable 100 cm USB 3.1 Gen 2 Type-C to Type-A 100 cm USB 3.1 Gen 2 Type-C to Type-A
S.M.A.R.T Passthrough Yes (Monitoring via Manager) Yes
UASP Support Yes Yes
TRIM Passthrough No No
Price USD 300 USD 160
Review Link HighPoint RS6114V Review TerraMaster D2-310 Review

Our evaluation routine for storage bridges borrows heavily from the testing methodology for direct-attached storage devices. The testbed hardware is reused. CrystalDiskMark is used for a quick overview, as it helps determine availability of UASP support and provides some performance numbers under ideal scenarios. Real-world performance testing is done with our custom test suite involving robocopy bencharks and PCMark 8's storage bench.

Performance with SSDs
Comments Locked


View All Comments

  • MajGenRelativity - Thursday, October 19, 2017 - link

    I enjoyed the well written article. I'm not the right person for this, but it's always good to keep up to date on different fields
  • gchernis - Thursday, October 19, 2017 - link

    I suspect the Xilinx chip will get warmer only when in RAID5. If so, they are using it to compute parity.
  • ddriver - Friday, October 20, 2017 - link

    Parity calculation is actually extremely simple and lightweight. Even for SSDs it will use milliwatts of power.
  • gchernis - Thursday, October 19, 2017 - link

    It's very hard to see temperatures on the Storage Enclosure Thermal Characteristics graphs... Great review, thank you Ganesh!
  • HStewart - Friday, October 20, 2017 - link

    I think this product will be really nice if it also supported TB3 - since it already supports USB C, it should be easy to support to TB3 especially now that Intel open it up.
  • MajGenRelativity - Friday, October 20, 2017 - link

    Thunderbolt 3 requires additional hardware beyond the USB C specification. While Intel opening the specification up makes it cheaper, it still is not free.
  • Vidmo - Saturday, October 21, 2017 - link


    Why do your performance numbers differ so much from this review?

    They were seeing much higher numbers with CrystalDiskMark than you saw, both in RAID 0 and RAID 5.
  • ganeshts - Wednesday, October 25, 2017 - link

    Their CDM testing parameters are different. We consistently use 5 passes with a 8GB working set. They appear to be using 3 passes with a 1GB working set. The numbers also heavily depend on the drives used in the enclosure - you can see the difference between the SSDs and the HDDs even in our review. Lastly, the enclosure relies on host system caching to some extent, and that might skew results for small working sets.
  • galfert - Sunday, November 12, 2017 - link

    I've been looking for a Thunderbolt 3 enclosure that supports NVMe and Trim. Does not seem to exist. I guess I'll keep waiting. Gotta be any day now already. Sheez!

Log in

Don't have an account? Sign up now