Board Features

ASUS F1A75-V Pro
Size ATX
CPU Interface FM1
CPU Support Llano - AMD A series and E2 series
Chipset AMD A75
Base Clock Frequency 100.0 MHz
DDR3 Memory Speed 1866 9-9-9
Core Voltage Auto, offset and manual, 0.8 V to 1.7 V
CPU Clock Multiplier Auto, 8x to CPU limit
DRAM Voltage Auto, 2.30 V to 1.35 V
DRAM Command Rate Auto, 1T or 2T
Memory Slots Four DDR3 DIMM slots supporting up to 64 GB
Dual Channel
Support for DDR3, 2400/2200/1866/1333/1066 MHz
Expansion Slots 1 x PCIe x16 (runs at x16/x0 or x16/x4)
1 x PCIe x4
2 x PCIe x1
3 x PCI
Onboard SATA/RAID 6 x SATA 6 Gbps, Support for RAID 0, 1, 10
Onboard 7 x SATA 6 Gbps
4 x Fan Headers
1 x Front Panel Header
1 x Front Panel Audio Header
1 x S/PDIF Out Header
4 x USB 2.0 Headers
1 x USB 3.0 Header
1 x COM header
1 x TPU Switch
1 x EPU Switch
Onboard LAN Realtek RTL8111E chip (10/100/1000 Mbit)
Onboard Audio Realtek® ALC892
Power Connectors 1 x 24-pin ATX connector
1 x 8-pin 12V connector
Fan Headers 1 x CPU Fan Header
2 x CHA
1 x PWR
IO Panel 1 x PS/2 port
1 x D-Sub
1 x DVI-D
1 x HDMI
1 x DisplayPort
1 x Optical S/PDIF Out Connector
2 x USB 2.0
4 x USB 3.0

1 x eSATA 6 Gbps
1 x Gigabit Ethernet
Audio Jacks
BIOS Version 0902 / 1501
Warranty Period 3 Years

As with the Gigabyte board, we see a Realtek NIC+Audio combination, although this is the ALC892 rather than the ALC889 on the Gigabyte. Also of note is that there is no Firewire here.

One of the big things to note is that the second PCIe x16 lane actually only runs at x4. This should put severe limitations on throughput if CrossFireX is planned between to discrete GPUs - however our GPU testing later shows that for some titles, it's not that much of a bottleneck.

In The Box

Driver CD
User Guide
IO Shield
Q-Connector for Front Panel
2 x Locking SATA 6 Gbps cables, right angled.

As we are in the $120 region for motherboards, we do not expect anything spectacular in the box. It is a shame that there is nothing special in here, such as a USB 3.0 back panel connector.


Driver installation is very easy from the driver CD, using an ‘Install All’ option to do everything, or drivers can be picked from a list then installed at once. The same goes for the software, though ASUS’ software has focused primarily on the AI Suite application, which we have covered on various ASUS boards before, so I will only cover it briefly here.

The AI Suite is designed to cover everything—overclocking options, energy efficiency options, fan controls, sensors for monitoring, and BIOS updates. Over the iterations it has got quicker to use and works rather well.

The fan controls are of importance here, allowing the user to control the CPU and Chassis fans, in terms of a double gradient speed profile.

One flaw to mention is the saving of overclock profiles. When a profile is saved, if you have changed the voltage in the software, saving the profile does not save the current voltage. It saves the voltage to which the board was booted at. Hopefully this will be corrected in future iterations.

ASUS F1A75-V Pro BIOS and Overclocking Gigabyte GA-A75-UD4H Overview and Visual Inspection


View All Comments

  • DanNeely - Monday, November 7, 2011 - link

    "It should be noted that, according to the Gigabyte website, the DVI-D does not support D-Sub by adaptor, and that when on integrated graphics, the connector cannot be changed while the motherboard is powered up."

    This sort of no plug and play nonsense is a throwback to the 90s, and has no business on a modern board.
  • Oberst - Monday, November 7, 2011 - link

    This is quite misleading, as both mobos use a DVI-D. So also both do not support D-Sub via adapter, Gigabyte is just the only manufacturer that clearly stresses this issue, all others assume that you know what the difference between DVI-D and DVI-I is.

    Also no word is left, that the gigabyte board is capable of Dual Link DVI, while the asus only allows single link, which enables only a limited range of display resolutions. As Dual Link on Llano boards is not very common, that would surely be some important fact to mention.

    I'm also not quite sure, what gigabyte means with "All integrated graphics ports do not support Hot plug. If you want to change to another graphics port when the computer is on, be sure to turn off the computer first." Maybe just a false translation, meaning you have to reboot the system, when changing the output (as the display driver doesn't switch the output automatically, you have to do that manually in the driver or by rebooting).
  • DanNeely - Monday, November 7, 2011 - link

    It's the no-hotplug part that apalled me, I should've trimmed the 1st part of the sentence away to be clearer but was in a rush for the shower by the time I finished reading the articel. Reply
  • Oberst - Tuesday, November 8, 2011 - link

    I'm not sure if that is really that strict as this statement shows. The Gigabyte translations are often not very good and the real meaning is quite different to the written text.

    When you change your display from DVI to DP, you have to do a reboot as the driver won't switch automatically. That's because you could just pull out a plug by hitting the cable accidentally. So the driver holds the primary output on the plug that was used before, only a reboot initiates a rescan of the displays and switches to another one.

    So maybe gigabyte wanted to express this. That would definitely be something to try out. But i can't imagine that you cannot plug in a second monitor on a running system, that would really be some strange behavior.
  • Googer - Sunday, November 13, 2011 - link

    Use a displayport adapter If you need DUAL LINK DVI connection on the ASUS board. Reply
  • Etern205 - Wednesday, November 9, 2011 - link

    Yea, DVI-D doesn't support DVI to VGA adapter as there is no 4 analog pins on that DVI port. Also even if it doesn't have that 4 pin, the adapter still won't fit as the analog ground (that horizontal pin) on the adapter is a tad wider. Reply
  • Etern205 - Wednesday, November 9, 2011 - link

    My mistake, looks like there is a DVI-D to VGA adapter and it's not the DVI to VGA adapter I was mentioning.

    DVI-D to VGA adapter

    DVI to VGA adapter
  • cjs150 - Monday, November 7, 2011 - link

    Really like layout of Gigabyte board. Although this is more of a problem with M-ATX boards I have struggled recently with fitting both graphics card with waterblock and a air cooler over the memory (fits but is incredibly tight) so seeing the PCIEx1 slot above the PCIex16 is a good move.

    What are all those legacy PCI slots doing there? What do people use them for? Across 5 computers at home I use 2 - I for a really old RAID card and one for a TV tuner. Is there really any need for them now?

    Recently I have seen a board with right angled 24 pin ATX socket. Please can this become standard
  • Golgatha - Monday, November 7, 2011 - link

    PCI is for your old sound card. Now if you're building new, there is no need for PCI to exist. Reply
  • Taft12 - Monday, November 7, 2011 - link

    IDE controller, RS-232 card... Me and many like me still need a PCI slot, and Asus and Gigabyte's market research shows the same.

    PCI will still be with us for many years to come yet.

Log in

Don't have an account? Sign up now