Visual Inspection

Upon the first inspection of the Supermicro X11SCA-W motherboard, the most polarizing aspect comes from the design. The board conforms to the standard ATX form factor which allows users to build a commercial based system into a standard chassis without the need to opt for a specialist case or blade. With a fully green PCB, the X11SCA-W isn't going to win any fashion awards and it's very apparent that Supermicro has gone for a functionally adept commercial option based on useful features without fanfare.

Like other ATX form factor motherboards, the X11SCA-W follows a conventional consumer layout with much of the componentry located where we would expect.  The power delivery and 8-pin 12 V CPU power input are located along the top of the PCB, while the RAM slots and SATA ports are located on the right-hand side. The PCIe slots are found in the bottom left half of the board.

The four memory slots have support for DDR4-2666. This includes compatibility for unbuffered ECC and non-ECC modules with a maximum voltage of 1.2 V. Just as the Xeon E-2100 series processors support, the Supermicro X11SCA-W has the ability to install up to a maximum of 64 GB in total. On the right-hand side of the RAM slots is a 24-pin 12 V ATX motherboard power input, while an 8-pin 12 V CPU power input is located on the left-hand side just next to the power delivery heatsink.

Storage wise the Supermicro X11SCA-W offerseight SATA ports, a single U.2 port and two PCIe 3.0 x4/SATA M.2 slots with both allowing M.2 22110 form factor drives to be installed. The eight SATA ports allow for users to make use of RAID 0, 1, 5 and 10 arrays so they wish to do so. The pair of included M.2 slots also have support for RAID 0 and 1 arrays and benefit from thermal sensor readers. Unfortunately the M.2 slots and U.2 port do share bandwidth with other slots. 

  • M.2_1 shares bandwidth with SATA_6 and the PCIe 3.0 x4 slot
  • M.2_2 shares bandwidth with SATA_7 and the U.2 slot

Dominating the PCB on the bottom right-hand side of the PCB are the PCIe slots. The Supermicro X11SCA-W has two full-length PCIe 3.0 slots which both have metal armor physical slot protection. The top full-length slot operates at PCIe 3.0 x16 while the second full-length slot operates at a maximum of PCIe 3.0 x8. This means the X11SCA-W can operate at either x16/x0 or x8/8. From the chipset is a single PCIe 3.0 x1 slot, a PCIe 3.0 x4 slot which shares bandwidth with the top M.2 slot, and a legacy PCI 32bit 5 V slot is featured at the bottom of the board.

The power delivery on the Supermicro X11SCA-W is somewhat irrelevant to the performance, as this board does not support voltage control. The Infineon PXE1520C PWM controller is running in a 5+2 configuration with each individual Infineon TDA21470 dual driver MOSFET being allocated its own Vitech 60 W inductor. This means the VCore is running a 5-phase design. The SoC area of the power delivery consists of two Infineon TDA21240 MOSFETs. Provided for cooling is a thin and lightweight aluminium heatsink which uses push pins to connect it to the PCB. Supermicro's legacy is built on its knowledge of server design, and the power delivery is where Supermicro tends to show this off with server-class components.

Focusing on the included controller set and rear panel of the X11SCA-W server-centric motherboard, Supermicro has opted to go with a dual Intel Gigabit LAN array. The red LAN port is powered by an Intel I219-LM controller  with the adjacent black LAN port being driven by an Intel I210-AT controller. The W in the X11SCA-W model name stands for wireless and is provided in this case by an Intel 9462 1x1 802.11ac Wi-Fi adapter.

The five 3.5 mm audio jacks and single S/PDIF optical output is powered by an older Realtek ALC888S 7.1-channel HD audio codec. For video, to use the integrated graphics on some of the Xeon E processors, there is a DisplayPort, HDMI and a DVI-D output. Finishing off the rear panel is a USB 3.1 Gen2 Type-A, a USB 3.1 Gen2 Type-C port and two USB 3.0 Type-A ports. Users looking to expand upon this can do so with the USB 2.0 or USB 3.0 header on board; each of these headers opens up an additional two ports per header. A solitary USB 3.1 Gen2 Type-A port is also located just to the right of the memory slots.

What's in The Box

Supermicro has provided a nice bundle with their retail packaged X11SCA-W model with the most notable inclusions being six red SATA cables, a silver rear IO shield, two M.2 SSD folder mounts and two Wi-Fi antennas. The bulk package bundle is slightly different with four less SATA cables than the retail packaging, as well as lacking a quick reference guide for this model. It should be noted that users will need to download the driver installation disc directly from the Supermicro website as they do not include any disc or media in the box; retail or bulk.

  • Six SATA Cables (straight angled)
  • Rear IO Shield
  • Two Wi-Fi / BT5  antennas
  • Quick Reference Guide
  • Two M.2 folder mounts
Supermicro X11SCA-W Overview BIOS And Software
Comments Locked

37 Comments

View All Comments

  • bolkhov - Saturday, November 24, 2018 - link

    CFL-R
  • mode_13h - Wednesday, November 21, 2018 - link

    Anyway, I'm holding back at least until I can get an 8-core Coffee Lake Refresh as a Xeon E.
  • dsplover - Wednesday, November 21, 2018 - link

    I’ve got a pair of ASRock Rack workstation boards.
    H97m WS & Z97m WS.
    Haven’t even opned the Z97 as it’s a spare that’s 4 years old and time to give th H97 a break.
    I’m trying to get a buyer to come down from 400 bucks for another new H97.

    These boards just run my niche apps so well I don’t want to upgrade.
    I get paid to performer so these boards get beat up as much as the storage devices that never hit idle.
    Bought a C246 with 1275G but my finicky apps aren’t liking the drivers so back to the old reliabl Z /H 7s.
  • El Sama - Friday, November 23, 2018 - link

    VRM Phases? VRM Cooling?
  • plonk420 - Monday, November 26, 2018 - link

    RTFA
  • Lord 666 - Sunday, November 25, 2018 - link

    Noticed the manufacturer stated within the specifications of this board that via bios update, it will support 128gb of memory. its expected in 2019, but my question is has anyone tested a 9900k with this board? lets go beyond the why, but thinking multipurpose rig.

Log in

Don't have an account? Sign up now