=<em>F-A-S-T</em>= DDR Memory: 2-2-2 Roars on the Scene
by Wesley Fink on August 5, 2004 12:05 AM EST- Posted in
- Memory
Test Results: Mushkin PC3200 Level II V2
To be considered stable for test purposes, Quake3 benchmark, UT2003 Demo, Super PI, Aquamark 3, and Comanche 4 had to complete without incident. Any of these, and in particular Super PI, will crash a less-than stable memory configuration. We have included results for RCW-ET using the Radar benchmark.Mushkin PC3200 Level II V2 (DDR400) - 2 x 512Mb Double-Bank | ||||||
Speed | Memory Timings & Voltage | Quake3 fps | Sandra UNBuffered | Sandra Standard Buffered | Super PI 2M places (time in sec) |
Wolfenstein - Radar - Enemy Territory fps |
400DDR 800FSB |
2-2-2-5 2.5V |
331.3 | INT 2888 FLT 2940 |
INT 4516 FLT 4511 |
129 | 70.8 |
433DDR 866FSB |
2-2-2-5 2.65V |
358.7 | INT 3124 FLT 3186 |
INT 4913 FLT 4906 |
119 | 77.0 |
466DDR 933FSB |
2-2-3-5 2.75V |
378.0 | INT 3253 FLT 3308 |
INT 5226 FLT 5223 |
112 | 81.7 |
500DDR 1000FSB |
2.5-3-4-7 2.85V |
397.0 | INT 3284 FLT 3327 |
INT 5498 FLT 5506 |
107 | 86.0 |
The test results indicate Mushkin selected chips for the best performance from DDR400 to DDR466, as the DDR466 timings with the Mushkin were better than any other Samsung-based memory. There was less attention to the top end on the Mushkin, as we could barely reach a stable DDR500 at more relaxed timings than the other Samsung-based memory.
Mushkin's approach is unique among the Samsung-based memory in the roundup. Those who care most about the performance in the range of DDR400 to DDR466 will be very happy that Mushkin has designed their DDR400 LII V2 for best performance in that most useful range.
47 Comments
View All Comments
Hasse - Friday, November 26, 2004 - link
Hi!I'm rather confused when I check my bios for all the abreviations.. TRC, TRAS.... it would be nice to know what to set them all to, I've got the Asus A8V Deluxe board.. and probably ain't the same bios view or settings that msi or others have. I've tried to overclock but the dang thing just hangs and creates not so funny looking bios boot images... Anyway thanx for a nice review. I've made my choice on memory based on it...
adamofwales - Thursday, November 11, 2004 - link
Quite easily, I must say,this is the BEST article about memory I have ever read.
Well done.
googles - Tuesday, October 19, 2004 - link
i cant find a crucial ballistix pc3200 @ 2-2-2-5 timings.according to their website,
http://www.crucial.com/ballistix/store/listmodule....
BL6464Z402 DDR PC3200 • 2-3-2-6 • Non-parity • DDR400 • 2.8V • 64Meg x 64
they only have a ddr400 ballistix @ 2-3-2-6, is this the ram that AT evaluated?
somekid617 - Thursday, September 23, 2004 - link
i got the ocz 3200 rev.2 and its great!somekid617 - Thursday, September 23, 2004 - link
mbor - Thursday, August 26, 2004 - link
#323Suns, 2-2-2-5 doesn't mean it takes 5 cycles every 4th fetch. The paramenters are:
CAS Latency-RAS to CAS Delay-RAS Precharge-Cycle Time (Tras).
The names actually vary depending on the source. I quote the names used in CPU-Z, as I think they're well establisheed. You should easily find the description of each of these in online references.
fritz64 - Monday, August 16, 2004 - link
babyelfPlease let us know your Optimum latency, memory speed and Voltage setting. I should receive mine today.
babyelf - Saturday, August 14, 2004 - link
Got my 3200 ballistix.. ran 2.65 at DDR410 at 2-2-2-11 and primed blend for 15 hoursnow running DDR420 at 2-2-2-11 at 2.7V
i'll try to go more later after i burn in at this speed
fritz64 - Friday, August 13, 2004 - link
#37 and #38I just ordered my 512MB x2 Crucial ballistix memory for my A64 3500+. I'm hoping to get 2-2-2-10@2.75V for at least 220MHz on Abit AV8 socket 939. I will let you guys know what I have later once I get my hands on those sticks. This will be an acid test for the information that we receive on Anandtech.
Fleabit - Thursday, August 12, 2004 - link
Wasn't so happy with my 2 * 512MB Ballistix either. couldn't get them to run dual channel stable at DDR 400 at 2-2-2-8 on an NF7-S v2.0 using the rated voltage.Memtested each of the dimms individually, at 2-2-2-8 @2.8v they max'd at 212 and 205.
At least crucial have a good RMA service :)
Has anyone had good experiences?