Team XTreem TXDR 1024M400HC2
Team will be another new name to our readers, but the company already has a world-wide presence with manufacturing in Asia and US Sales Offices.
Specifications
The Team 2GB kit is another DDR400 rated memory kit, which, as expected, features Infineon chips.
As we have seen with all the new 2GB kits, high memory voltage is not required to get the most from the 2GB kits. Team also rates their kit at standard voltage, and we never required more than 2.8V to get the most performance from the 2GB kit.
Test Results
To be considered stable for test purposes, Quake3 benchmark, UT2003 Demo, Super PI, Aquamark 3, and Comanche 4 had to complete without incident. Any of these, and in particular Super PI, will crash a less-than stable memory configuration.
The DDR400 rating would lead us to believe that these are Infineon B die chips, and if they are, Team has done an excellent job in binning chips and designing their PCB and SPD. That's because Team Xtreem reaches the highest overclock that we have seen with a DDR400 rated 2GB kit.
Memory timings are what we would expect with a well-designed Infineon chip-based memory, and the Team overclocks all the way to DDR533. To repeat, this is the highest overclock in the roundup for a memory rated at DDR400.
The Team name may not be familiar to you, but you should definitely add Team to your shopping list. These are solid DDR400 Infineon DIMMs and if the price is right, you will not be disappointed in your new memory purchase. It is true that Infineon C die reaches a bit further if properly binned, but the difference between the TEAM at 533 and C die at 550 or higher is not that big. Other DDR400 rated Infineon DIMMs in this roundup often struggled to even approach DDR500 in their overclocks.
Team will be another new name to our readers, but the company already has a world-wide presence with manufacturing in Asia and US Sales Offices.
Specifications
The Team 2GB kit is another DDR400 rated memory kit, which, as expected, features Infineon chips.
| Team XTreem TXDR 1024M400HC2 Memory Specifications | |
| Number of DIMMs & Banks | 2 DS |
| DIMM Size Total Memory |
1GB 2GB |
| Rated Timings | 2-3-3-5 at DDR400 |
| Rated Voltage | Standard (2.6V) Voltage |
| SPD | 2-3-3-5 |
As we have seen with all the new 2GB kits, high memory voltage is not required to get the most from the 2GB kits. Team also rates their kit at standard voltage, and we never required more than 2.8V to get the most performance from the 2GB kit.
Test Results
| Team XTreem TXDR 1024M400HC2 (DDR400) - 2x1GB Double-Bank | |||||||
| CPU Ratio at 2.4GHz | Memory Speed |
Memory Timings & Voltage |
Quake3 fps |
Sandra UNBuffered | Sandra Standard Buffered |
Super PI 2M places (time in sec) |
Wolfenstein - Radar - Enemy Territory fps |
| 12x200 | 400DDR | 2-3-2-7 2.5V |
540.9 | INT 2502 FLT 2630 |
INT 6034 FLT 6018 |
82 | 117.9 |
| 11x218 | 436DDR | 2-3-2-7 2.7V |
545.0 | INT 2661 FLT 2825 |
INT 6462 FLT 6372 |
81 | 118.6 |
| 10x240 | 480DDR | 2.5-3-2-7 2.6V |
554.3 | INT 2853 FLT 3040 |
INT 6722 FLT 6650 |
81 | 120.2 |
| 9x267 | 533DDR | 3-3-2-8 2.8V |
558.0 | INT 3044 FLT 3247 |
INT 7003 FLT 6941 |
80 | 121.2 |
| 10x267 (2.67GHz) |
Highest Mem Speed DDR 533 |
3-3-2-8 2.8V |
590.9 | INT 3175 FLT 3388 |
INT 7868 FLT 7857 |
76 | 132.2 |
The DDR400 rating would lead us to believe that these are Infineon B die chips, and if they are, Team has done an excellent job in binning chips and designing their PCB and SPD. That's because Team Xtreem reaches the highest overclock that we have seen with a DDR400 rated 2GB kit.
Memory timings are what we would expect with a well-designed Infineon chip-based memory, and the Team overclocks all the way to DDR533. To repeat, this is the highest overclock in the roundup for a memory rated at DDR400.
The Team name may not be familiar to you, but you should definitely add Team to your shopping list. These are solid DDR400 Infineon DIMMs and if the price is right, you will not be disappointed in your new memory purchase. It is true that Infineon C die reaches a bit further if properly binned, but the difference between the TEAM at 533 and C die at 550 or higher is not that big. Other DDR400 rated Infineon DIMMs in this roundup often struggled to even approach DDR500 in their overclocks.
Facebook
Twitter
RSS
51 Comments
View All Comments
JarredWalton - Monday, January 23, 2006 - link
I don't anticipate DDR1 prices changing much, and once AM2 comes out I expect prices to start climbing as DDR1 productions halts. DDR1 prices seem to have hit bottom about 6 months ago, and they're already starting to rise - at least on the budget parts.Thor86 - Monday, January 23, 2006 - link
Did I miss this in the review? If not, it would help if you told us what memory settings used in the DFI bios for these sticks reviewed.Wesley Fink - Tuesday, January 24, 2006 - link
I used the 7/06 BIOS, which is basically the Bigtoe BIOS. I have found this BIOS to be remarkably compatible with a wide range of memory. All memory settings were left at default except the 4 reported memory timings (CAS to TRAS) and memory voltage in testing all the memory. We did not do any special tweaking, which is another reason we reran tests with the 3 2GB kits tested earlier. You can definitely achieve better bandwidth and higher scores than we did by tweaking memory in the DFI BIOS.keldog7 - Monday, January 23, 2006 - link
I was surprised to find your review stating the Corsair 3500LL could only reach 492 MHz...especially when out of the box, I clocked mine to 500 MHz. This required no special tweaking of the other timings, other than what's listed below. Any careful research on this memory, using the many online reviews of it, show that the RAM runs fine (at slightly relaxed timings), well into 500Mhz territory, and beyond.In my case, I've got it on an A8N32SLI, at 2.7V, running 2.5-3-2-7 1T with a 1:1 divider at 250Mhz. In my case, this has been verfied to be Memtest86+ stable for at least 12 hours (last run was 90 hours...then I had to stop it to actually get some work done!)
I wonder if the motherboard used in your review has biased your overclocking results?
Wesley Fink - Monday, January 23, 2006 - link
According to my review notes, the Corsair 3500LL Pro cloked to almost 260 (DDR520) on Super Pi and Sandra memory tests, but the highest we could do with stability on 3D tests was 246 (DDR492). There is always varaition in memory results.Since you criticize my results as being too low for your memory and another reader criticized my results as being too high for his memory, it is likely my results are typical of the range of results readers might achieve. Some will do better than my results and some will do worse. Overclocking results do vary among memory samples.
wildstaroct - Monday, January 23, 2006 - link
Unless Anandtech got really good batches of Infineon ICs, I don't buy the analysis. There have been numerous reports of 3D instability issues...I've experienced them myself with the Redlines. They are primex2 and memtest stable at fairly high speeds (270) but only 3D stable near spec (250ish).entrecote - Friday, January 27, 2006 - link
Neither do i buy it.I invested in a pair of the mentioned 2GB Mushkin Redline PC4000 memory. I´ve stubbornly been trying to tweak them on my DFI Lanparty + X2 Toledo processor for two months. This Redline kit of mine refuses to surpass 252MHz / DDR504. One module does 256MHz / DDR512, the other one does 252MHz / DDR504 regardless of timings. Trust me, I´ve tried all combinations of different drive strenghts, Trefs and so on. My case is not isolated, I have the same symptoms as the perhaps majority of 2x1GB Redline owners, "3D instability".
My thoughts on the matter is that Mushkin was aware of this bad batch of theirs, possibly due to quality fluctuations of infineon modules. Then they quickly began to separate a few review samples for marketing puposes. I went through the same dissapointment one year ago when buying PC3200 Ballistixs after quickly reading through among other reviews anadtechs infamous "Ballistix cherry pick" DDR roundup.
I put great trust in anandtech, please do me a favor in the future to only review retail samples of memory. Some of these mentioned brands purposefully send special samples to rewievers.
Wesley Fink - Monday, January 23, 2006 - link
We reported what we found, and 3D tests are part of our benchmarking. The OCZ for example was Super Pi and memtest stable to 290, but 3D dropped the stability to 275 (DDR550) which we reported. The Redline went well over 300 on memtest and Super Pi, but 293 (DDR586) was our highest 3D stable.What memory controller revision are you using with the Infineons? Our tests are with a Rev. E, and we have seen lower performance on the older clawhammer memory controllers with the 1GB dimms.
wildstaroct - Monday, January 23, 2006 - link
I have a rev E6 Opteron 170. Perhaps I just got an unlucky set of sticks, but the forums are loaded w/ people with similar issues, particularly around 3D.Duonger - Monday, January 23, 2006 - link
the mushkin parts have been back in stock for over a week now and is available (if not sold out already) on Newegg and on Mushkin`s Site.Wes- the ocz parts u compared. those are 2x512mb kits. why did u include it on this 2gig round up?