Crucial Ballistix CLIII5N.32 PN56278
As the retail sales arm of Micron, the huge memory chip manufacturer, Crucial has managed to impress us many times with their high-end Ballistix memory line. The Ballistix name is almost always means high performance, but it also normally represents good value in the memory market.
There is nothing in the appearance of Ballistix memory that would tell you anything about what is behind the orange-colored heatspreaders. All Ballistix memory looks the same and only the stickers on the heatspreaders tell you a little about which Ballistix you have in your hand. Crucial makes Ballistix in 256MB, 512MB, and these 1GB DIMMs. Ballistix DDR is based on Micron chips, which in this case is a very good thing. The Micron memory chips exhibit outstanding performance and overclocking capabilities, and lately, they have only been available through Crucial. This is quite a change from the days when high-performance Micron chips were available from many enthusiast memory makers.
Specifications
The Crucial Ballistix 2GB kit is rated at DDR500 at the somewhat conservative ratings of 3-3-3-8. We actually found that the DIMMs would run at much better timings at DDR500. We could run the DDR500 speed at 2.5-2-2-7 at 2.8V, which is the best performance that we have ever seen at DDR500 with 1GB DIMMs.
Voltage is rated at standard or 2.6V.
Test Results
To be considered stable for test purposes, Quake3 benchmark, UT2003 Demo, Super PI, Aquamark 3, and Comanche 4 had to complete without incident. Any of these, and in particular Super PI, will crash a less-than stable memory configuration.
Crucial Ballistix has been available for several months and the performance characteristics are pretty well known. We achieved incredible results with our Crucial Ballistix, but our results should be considered among the best that you can achieve with these 1GB DIMMs. Where we were able to run at 2-2-2 timings at stock voltage, we more commonly see results at DDR400 of 2-3-2. This is not to take anything away from the Ballistix 2GB kit, as it is definitely an incredible performer at the more normal results that we see in Forums.
One word of caution: some users have been killing their Crucial Ballistix 2GB kits. It appears that the culprit is high memory voltages. We did a survey of a number of Forums and found that, in most cases, the memory was dying at voltages of 2.85V and higher. Our advice, which we also followed in benchmarking for this review, is to keep voltages below 2.85V with the 2GB Crucial Ballistix kits.
The other end of the spectrum was also outstanding for Ballistix. We reached a stable DDR610 overclock at 2.8V with the 2GB kit. This is the highest overclock achieved with any of the nine 2GB kits tested in this review. Our only real reservation with Ballistix is the spotty availability that has characterized this product since launch. This "on again, off again" availability is usually an indication that yields may not be as good as a manufacturer would like. We don't know the real reasons why 2GB Ballistix doesn't stay in stock, but you should be aware of the supply problems before deciding on this 2GB kit.
As the retail sales arm of Micron, the huge memory chip manufacturer, Crucial has managed to impress us many times with their high-end Ballistix memory line. The Ballistix name is almost always means high performance, but it also normally represents good value in the memory market.
There is nothing in the appearance of Ballistix memory that would tell you anything about what is behind the orange-colored heatspreaders. All Ballistix memory looks the same and only the stickers on the heatspreaders tell you a little about which Ballistix you have in your hand. Crucial makes Ballistix in 256MB, 512MB, and these 1GB DIMMs. Ballistix DDR is based on Micron chips, which in this case is a very good thing. The Micron memory chips exhibit outstanding performance and overclocking capabilities, and lately, they have only been available through Crucial. This is quite a change from the days when high-performance Micron chips were available from many enthusiast memory makers.
Specifications
The Crucial Ballistix 2GB kit is rated at DDR500 at the somewhat conservative ratings of 3-3-3-8. We actually found that the DIMMs would run at much better timings at DDR500. We could run the DDR500 speed at 2.5-2-2-7 at 2.8V, which is the best performance that we have ever seen at DDR500 with 1GB DIMMs.
Crucial Ballistix CLIII5N.32 PN56278 Memory Specifications | |
Number of DIMMs & Banks | 2 DS |
DIMM Size Total Memory |
1GB 2GB |
Rated Timings | 3-3-3-8 at DDR500 |
Rated Voltage | Standard (2.6V) Voltage |
SPD | 3-3-3-8 |
Voltage is rated at standard or 2.6V.
Test Results
Crucial Ballistix CLIII5N.32 (DDR500) - 2x1GB Double-Bank | |||||||
CPU Ratio at 2.4GHz | Memory Speed |
Memory Timings & Voltage |
Quake3 fps |
Sandra UNBuffered | Sandra Standard Buffered |
Super PI 2M places (time in sec) |
Wolfenstein - Radar - Enemy Territory fps |
12x200 | 400DDR | 2-2-2-7 2.6V |
545.2 | INT 2601 FLT 2724 |
INT 6082 FLT 6029 |
82 | 118.9 |
11x218 | 436DDR | 2.5-2-2-7 2.6V |
545.0 | INT 2724 FLT 2824 |
INT 6449 FLT 6386 |
81 | 118.8 |
10x240 | 480DDR | 2.5-2-2-7 2.7V |
556.9 | INT 2857 FLT 3033 |
INT 6736 FLT 6656 |
80 | 120.6 |
9x267 | 533DDR | 3-3-3-7 2.7V |
553.8 | INT 2991 FLT 3171 |
INT 6971 FLT 6871 |
80 | 120.3 |
8x300 | 600DDR | 3-4-4-8 2.8V |
561.2 | INT 3186 FLT 3335 |
INT 7173 FLT 7078 |
80 | 121.5 |
9x305 (2.75GHz) |
Highest Mem Speed DDR 610 |
3-4-4-8 2.8V |
618.6 | INT 3420 FLT 3574 |
INT 8000 FLT 7901 |
71 | 135.1 |
Crucial Ballistix has been available for several months and the performance characteristics are pretty well known. We achieved incredible results with our Crucial Ballistix, but our results should be considered among the best that you can achieve with these 1GB DIMMs. Where we were able to run at 2-2-2 timings at stock voltage, we more commonly see results at DDR400 of 2-3-2. This is not to take anything away from the Ballistix 2GB kit, as it is definitely an incredible performer at the more normal results that we see in Forums.
One word of caution: some users have been killing their Crucial Ballistix 2GB kits. It appears that the culprit is high memory voltages. We did a survey of a number of Forums and found that, in most cases, the memory was dying at voltages of 2.85V and higher. Our advice, which we also followed in benchmarking for this review, is to keep voltages below 2.85V with the 2GB Crucial Ballistix kits.
The other end of the spectrum was also outstanding for Ballistix. We reached a stable DDR610 overclock at 2.8V with the 2GB kit. This is the highest overclock achieved with any of the nine 2GB kits tested in this review. Our only real reservation with Ballistix is the spotty availability that has characterized this product since launch. This "on again, off again" availability is usually an indication that yields may not be as good as a manufacturer would like. We don't know the real reasons why 2GB Ballistix doesn't stay in stock, but you should be aware of the supply problems before deciding on this 2GB kit.
51 Comments
View All Comments
PrinceGaz - Monday, January 23, 2006 - link
"... 2GB also makes sense for the OS future. With Vista coming and 2GB, the new memory recommendation for the new OS, you will be set for Vista."I was under the impression that the minimum is expected to be 512MB, and that 1GB will be recommended for good responsiveness under normal use. Having said that, I would personally choose 2GB for any new system as pairs of 1GB DDR (and of course DDR2) modules are now readily available and competitively priced. Unfortunately most big-name OEM systems are still shipping with either 512MB, or if you're lucky 1GB.
bigtoe36 - Monday, January 23, 2006 - link
Being honest we have had some supply issues, and some issues regarding supply that are out of our control. We do have stock and will have more real soon.ocztony
bigtoe36 - Monday, January 23, 2006 - link
This was to counter any moans about availability before they were posted.emilyek - Monday, January 23, 2006 - link
You guys tested the worst GSKILL kit.Their pc4000 2 gig kit (speed-binned version of that kit) is the same price as the 2-3-2-5 chip ($200) and will do DDR580
Their $250 kit 2-3-2-5 would contend with the Mushkin and the Crucial at a much lower cost.
Wesley Fink - Monday, January 23, 2006 - link
The Silver Editors Choice Corsair 4000PT, and the OCZ PC4000 Gold and PC4000GX XTC, also based on UCCC chips, are all in the $205 to $230 price range for the 2GB kit from e-tailers. So $250 for a UCCC kit seems in line but hardly a bargain.As for testing the worst G. Skill, we asked all the memory manufacturers to supply their "best" 2GB kit for our roundup. The manufacturers decided what to supply, and we expect Enthusiast memory makers to know what is best in their line.
irev210 - Monday, January 23, 2006 - link
The crucial memory is amazing memory.I was able to get it stable at 3-3-3-8 @ 300mhz, but you really need to spend some time on the settings, it is VERY picky memory. Both tras and drive strength play huge factory in memory stability.
Yes, it is suspected that due to really high RMA they discontinued, however what anandtech doesnt report is what actually happens to the memory.
Even at 2.8vcore or less PLUS active cooling, 1 2 or 3 months down the line your memory will just start dying.
Thinks like memtest86 will check out fine, but then while gaming, your rig will just lock up. Random bluescreens, random lockups...
There is a big story to these ballistix, it is too bad they simply have a HUGE rate of failure. Do a ddr2 roundup, then you will see how many people use micron fatbodies for their high performance ddr2 memory. You dont see that with the high density memory, and obviously i suspect due to stability issues.
My advice for memory is the g.skill F1-4000USU2-2GBHZ based on samsung ram, it has been doing well, and g.skill has awesome customer service.
I personally am going to wait for ddr2 before going with 1gb sticks, then ballistix 2gb set is on my list. But that is just me.
Bull Dog - Monday, January 23, 2006 - link
I'm another Ballistix memory user here. I ran mine at 2.75v the whole time and they just died after a while. Screw you Crucial/Micron. I will NEVER buy your products AGAIN. (I don't care if they have zero problems eitehr.gooser - Monday, January 23, 2006 - link
Now what about the tracers?? I just purchased the 2 GB tracers last week knowing about the issues with the regular ballistix after a couple of months. I have read that the tracers use a higher quality power modulator, thus dont have the same problem. Anyone?lopri - Monday, January 23, 2006 - link
Lots of work and outstanding comments. Thanks. This review, along with the Part I, is significant in that it puts an end to the 1GB system memory standard. It's declaring that an *era* of 2GB system memory is finally here.However, with these super high-clocking 1G sticks (512MB sticks also for that matter), there is one *realer* question that's haunting my mind. With the current crop of DDR memory reaching speed of DDR550~DDR600, one has to wonder - What's the good if CPUs can't handle the speed of memory?
Yes, I'm questioning the capability of A64/Opteron's memory controller. Because even the best current AMD CPUs often fail to keep up with the speed of memory. You've got a PC4800 DDR memory? Good luck, pray your CPU can run it at that speed. This issue is, at least for me, very real. I just don't see the point of high-clocking memory when the truth is CPUs' memory controllers are the limit. (And to some extent motherboards, of course)
In the light of this, would it be possible for you to test the quality of each revision of AMD CPUs' memory controllers? Preferably with recent cores - namely, Venice, San Diego, Toledo, Manchester and their Opteron equivalents. The more detailed, the better. Rev E3, E6, E4, and even the steppings.
While reading this excellent review, I couldn't shake the issue of memory controller off my head. These days a stick of RAM seems only as good as the CPU's memory controller it relies on. Unless one is just happy to see her/his RAM passing memtest @DDR600 all day long.
Again, thanks for your hard work on this review, Wesley. However, I'd really like to hear from you about the issue that I'm bringing here. I'd much appreciate it.
lop
dlerious - Monday, January 23, 2006 - link
If my CPU can't keep up with my RAM, I just drop the multiplier (and/or divider) down until I find the point where both run as high as possible at the voltage and temps I'm comfortable with.