Introduction

Anyone building a computer system should eventually pose the question: How much power does the system actually require? This is an important consideration, since it's impossible to choose an appropriate power supply without actually knowing the demands of your system. Unfortunately, many users take the easy way out: just grab a 500W power supply and call it good. If you really want to be safe, you can even grab on 800W PSU... or if you plan to run multiple graphics cards perhaps you really need a 1000W unit, right?

If people really took the time to examine system power requirements, we would see a tremendous increase in sales of 300W to 400W PSUs. The truth is that the vast majority of systems would run optimally with such a "small" power supply. Even if you're running SLI/CrossFire, you don't actually need a 750W power supply. (Of course, we recommend purchasing a good quality power supply, as there are certainly "750W" PSUs out there that can't reliably deliver anywhere near that much power.) To help dispel some myths relating to power requirements, we've put together a couple of charts.

GPU Power Consumption*
Manufacturer Idle Load
NVIDIA GeForce 9600 GT 49W 107W
NVIDIA GeForce 8800 GT 64W 115W
NVIDIA GeForce 9800 GTX 79W 116W
NVIDIA GeForce 9800 GX2 90W 179W
NVIDIA GeForce 8800 Ultra 100W 186W
ATI Radeon HD 3650 17W 32W
ATI Radeon HD 3850 53W 82W
ATI Radeon HD 3870 62W 92W
ATI Radeon HD 2900 XT 67W 104W
ATI Radeon HD 3870X2 55W 130W

* Actual power consumption for the graphics cards only. Results taken at idle on the Windows desktop and under full load running the Fur benchmark.

CPU Power Consumption**
Manufacturer Idle (EIST or CnQ Enabled) Idle Load
Intel Core 2 Duo E4500 14W 17W 36W
Intel Core 2 Duo E8500 18W 22W 43W
Intel Core 2 Quad Q9550 19W 23W 60W
Intel Core 2 Extreme QX6850 29W 32W 103W
Intel Core 2 Extreme QX9770 26W 56W 86W
AMD Athlon 64 X2 5000+ 33W 47W 89W
AMD Athlon 64 X2 6000+ 25W 74W 160W
AMD Phenom X3 8750 50W 67W 86W
AMD Phenom X4 9600 BE 29W 36W 101W
AMD Phenom X4 9850 BE 38W 53W 126W

** Actual power consumption for just the processor. Results taken at idle on the Windows desktop with either EIST/C&Q enabled or disabled, and full load generated using BOINC.

Chipset/Motherboard Power Consumption***
Platform and Chipset Load
Intel P35 (775) 37W
Intel P965 (775) 39W
Intel X38 (775) 52W
Intel X48 (775) 40W
NVIDIA 680i (775) 46W
NVIDIA 790i (775) 51W
NVIDIA 750i (775) 59W
NVIDIA 780i (775) 69W
NVIDIA 8200 (775) 29W
AMD 690G (AM2) 34W
AMD X3200 (AM2) 35W
AMD 770 (AM2) 40W
NVIDIA 570 (AM2) 40W
AMD 790FX (AM2) 42W
AMD 790X (AM2) 43W

*** Actual power consumption for the motherboard and chipset. Idle and load power do not differ by any significant amount.

Top-end graphics cards are clearly one of the most demanding components when it comes to power requirements in today's systems. Only heavily overclocked CPUs even come close to the same wattages. Note that the above chart only includes last generation cards; NVIDIA's latest GTX 280 requires even more power.

Looking at the processor side of the equation, Intel's Core 2 Duo/Quad/Extreme CPUs in general have very low power requirements. AMD's latest Phenom processors aren't far behind, however, especially in light of the fact that they include the memory controller rather than delegating the task to the chipset. We should also mention that part of the reason for the extreme power requirements on the X2 6000+ come from the use of an older 90nm process.

Naturally, motherboards also require a fair amount of power. Current motherboards average around 47W for socket 775 and 39W for socket AM2/AM2+, but features and other factors can heavily influence that number. Outside of their IGP solution, NVIDIA's chipsets tend to use more power than the competition; AMD chipsets on the other hand typically require less power. Again, numerous other aspects of any particular motherboard will impact the actual power requirements, including BIOS tuning options.

Hard drives and optical drives account for another 10 to 20W each. However, remember that hard drives are a relatively constant 10 to 15W of power draw (average is around 12W) since the platters are always spinning (i.e. idle), and movement of the drive heads during read/write operations (i.e. load) only increases power draw slightly. Optical drives on the other hand stop spinning when idle, requiring only about 5W, while during read or write operations they need around 18W.

RAM power requirements measured a constant 2W per DIMM, regardless of capacity (though clearly not including FB-DIMMs). That figure is estimated, unfortunately, as we could not measure DIMM power requirements directly; we measured power draw with two DIMMs and then again with four DIMMs to arrive at the reported figures. It's also not possible to easily separate memory power requirements from the motherboard and chipset, as they share many of the same power connections from the PSU.

Building Three Sample Systems
Comments Locked

98 Comments

View All Comments

  • nilepez - Thursday, September 25, 2008 - link

    I've seen this site and countless others constantly promoting the benefit of 750 watt+ PSUs.

    The reality is virtually nobody needs 500W, much less 750 or 1KW.

  • AnAverageJoe - Wednesday, September 24, 2008 - link

    Thank you for this article, it is really one of the more organized efforts at getting this kind of info out there that I have read and hopefully will save folks from overdoing it (saving $$ in the process). Couple of comments:

    1. p.1 “If people really took the time to examine system power requirements”: From the perspective of building a new rig, where does one find this information? Any sort of figures, short of the very few articles such as this and public power supply guesstimators, appear non-existent. As stated in the article something is better than nothing but getting precise information appears impossible for any given component. Both Intel and AMD publicly provide technical data on their parts but the only single figure one can really get out of that data is the TDP for the processors. I have failed to find any similar technical data for GPUs and although most graphics card reviews now include power draw it is for the system and not the graphics card itself thus there is is no way to get the discrete graphics card power draw. Ditto for every other component. In sum, I don't see any way for one to gather the required data to compute the power requirements for any planned build short of actually building the thing and putting test equipment to it.

    2. I was left wanting a statement to the effect of "one important goal of choosing a power supply is to maximize efficiency under expected operating loads." The examples do make the point just took a bit longer for me to get it thru my dense skull.

    Again, thanks for spending the time to put this together because this really is I think one of the most overlooked areas of system integration and in my experience impossible to more than generally guesstimate.
  • Cincybeck - Tuesday, September 30, 2008 - link

    Try searching "power supply calculator" in Google. The one, eXtreme has, provides a pretty complete list and quite a bit of options. I punched in the low end and mid range computers from the article. The calculator is high according to the article's results, but close enough to give you a good idea.
  • Johnniewalker - Wednesday, September 24, 2008 - link

    I have been waiting for an article like this for years, thanks! I always suspected people were buying PSU's that were too big.
  • rvikul - Tuesday, September 23, 2008 - link

    Anandtech is back! This is exactly the kind of information Anandtech excels at providing. very relevant and very useful. Thanks and keep it up (and please dont go back to discussing social issues etc).


  • OddJensen - Wednesday, September 24, 2008 - link

    Strange figure for the 2900XT. Knowing it's one of the most powerguzzling single GPU cards, it should have been much higher, right?
  • CSMR - Tuesday, September 23, 2008 - link

    I'm going to repeat myself because I feel this is important.

    The tables claim to represent actual power consumption of processors and chipsets but the figures are very exaggerated. (There are even people who run whole systems on one or two of the chipsets listed on less power than the power the article claims for just the chipset.)

    Here are more accurate CPU measurements from xbitlabs:
    http://www.xbitlabs.com/articles/cpu/display/intel...">http://www.xbitlabs.com/articles/cpu/display/intel...
    Behardware gets similar results. (Can't find the link straight away.)

    Must fix this as Anand needs to keep its reputation for good information. You can't have figures (CPU idle power) that are out by a factor of 10!

    The graphics idle power data are better than the CPU data but also too high, by a factor of about 2, compared to existing measurements:
    http://archive.atomicmpc.com.au/forums.asp?s=2&...">http://archive.atomicmpc.com.au/forums.asp?s=2&...
  • JarredWalton - Tuesday, September 23, 2008 - link

    The question is: did Christoph measure power incorrectly, or did someone else? From my understanding, he's measuring the current on the various wires leading from the PSU to the components. HDD is of course easy to measure. The ATX12V/EPS12V connector supplies the CPU, so that's simple as well. PCI-E gets 12V from the PEG connector along with the extra four pins on the 24-pin ATX connector. The remaining pins on the 24-pin ATX feed the chipset, RAM, and other motherboard components. Sum all of that together and you get the power draw for the entire system.

    Perhaps the CPU power draw numbers are high and the chipset/mobo numbers are low, but worst case the point of the article is to show that higher wattage PSUs are not required for most systems. A midrange system with similar components might use a bit less than what we estimate, but I'm quite sure it wouldn't need more power than our high estimate.

    I won't guarantee that the individual numbers are 100% accurate, but I doubt that desktop C2D processors are idle at only 7W or less. I know on my own C2Q Q6600 8800GT 4GB system it idles at 176W power draw, and if I put a load on just the CPU (Folding@Home SMP) the draw increases to 262W. Guessing at 80% efficiency, the components are consuming 141W to 210W, which means CPU (and mobo, chipset, and RAM) power use went up 69W. That's pretty close to the QX6850 result (fudging on the 65nm vs. 45nm and Penryn vs. Kentsfield). The Fur benchmark also gives ~262W average (one core is 100% load on the CPU), so the GPU + one CPU core increases power consumption by the same 69W, but some of it goes to the CPU and most of it goes to the GPU. That jives with the 51W increase in power Christoph measured on the 8800 GT. Running both - a "worst case" test - gives a power draw of 315W to 337W, with an average of around 324W.

    So a system somewhat similar to Christoph's "midrange" setup (and estimating efficiency) uses 141W idle and 260W load. That doesn't include trying to tax the HDD or DVD, which might increase the load by another 20W, and it uses a single GPU instead of a 3870X2. What's the specific amount used by the CPU, the GPU, the RAM, the chipset, and the other motherboard components? I can only guesstimate, but stepping back to examine the whole picture I don't have any serious problems with the tables on page 1. CPU power is probably lower, since it sounds like Christoph measured the current going through the ATX12V lines and some of that will feed the VRMs and other bits and pieces on the motherboard.
  • Christoph Katzer - Wednesday, September 24, 2008 - link

    Thanks for the explanation. The point being is that I measured how much current is going to the CPU through the 12V rails. What happens later doesn't matter since the power supply needs to deliver X current at that specific time.

    That doesn't mean however that the CPU is actually using all of this delivered power since we loose power at the VRMs and CPU itself. SO if there is X watts going to the CPU it doesn't mean the CPU actually needs that much power but since it is being delivered it should be called the "actual power consumption".

    For example the 6000+ which needs quite too much obviously. We know now it had something to do with the different VRMs at the AM2 and AM2+ boards. The power is being delivered, meaning the power supply needs to provide this amount x. If the CPU actually needs it or not is irrelevant. Of course if I would have known from the difference between AM2 and AM2+ I would have measured it in a different way, no one is perfect and I know now how to do it better next time.

    As for the Chipset it is indeed tricky since every mobo vendor has different additional chips installed that take a different amount of power. So if we do publish an article about this we will have to mention the actual manufacturer of course.

    It's just funny that everyone says the results are too high but I get an Email from Taipei that my numbers are far too low...
  • Barack Obama - Tuesday, September 23, 2008 - link

    Notch one up for the great AT team :D

Log in

Don't have an account? Sign up now