Silverstone Raven: A New Concept in Case Cooling
by Christoph Katzer on February 6, 2009 4:00 AM EST- Posted in
- Cases/Cooling/PSUs
Test Setup
| Test Configuration | |
| CPU | Intel Core 2 Extreme QX6850 (Quad-core 3.0GHz, 2x6MB L2, 1333FSB) |
| Motherboard | Asus P5N-T Deluxe |
| Graphics Cards | Triple-SLI NVIDIA GeForce 8800 Ultra |
| Memory | 4GB OCZ DDR2 PC2-8500 Platinum Series |
| HDD | Western Digital WD4001ABYS (Fully equipped) |
| CPU Cooler | Zalman CNPS7700 |
| Power Supply | PC Power & Cooling Turbo Cool 860W (AnandTech Edition) |
For the temperature results we decided to attached temperature diodes to the CPU cooler, the GPU cooler (first GPU), the hard drives, and the inside of the chassis. This configuration may or may not end up being similar to what you run, but since we will use the same hardware in our case reviews we will be able to build a collection of results. The first graphics card in an SLI or triple-SLI setup always runs hotter than the others, which is why we will take measurements from this card.
For the time being, we installed the maximum supported number of hard drives (seven in this case). However, the temperature diode will also be connected to the first hard drive of our RAID setup. The fourth diode is in the middle of the case at the height of the DIMMs. This diode will allow us to measure ambient case temperature, and we will test optional configurations as necessary -- i.e., if a case offers a special air duct we will test both with and without this air duct.
Note: You will notice that we are testing with a very high-end setup for now, which is not representative of many computer systems. We will add a second more reasonable configuration in the future that will focus on reducing noise levels. For now, the temperature and noise readings should be considered something of a worst-case scenario.
Facebook
Twitter
RSS
49 Comments
View All Comments
Visual - Friday, February 6, 2009 - link
i really don't fancy the idea of intake fans on the bottom. there's going to be a huge amount of dust gathering down there.and expansion cards and cables at the top, really? maybe it can work if i hide the case under the desk, but what if it is on top?
weevil - Friday, February 6, 2009 - link
But you would never have to sweep the floor.HelToupee - Friday, February 6, 2009 - link
I really like the idea of the layout of this case. It's the perfect arrangement for an under-the-desk setup. You are right that the intakes on the bottom of the case are a terrible idea. They'll clog with dust, and need cleaning constantly, and are in the most inconvenient place they could possibly be. Maybe if they add some kind of ducting along the back to direct air underneath the case and raised the case off the ground a bit.What I really like is the cable management. Where the cables come out of the power supply is right next to where they plug into the motherboard. If you look at the pictures of the system assembly, there are no cables at all routed over the motherboard. All the cable mess tucks nicely away into the bottom front of the case where it's not visible, and not in the way of airflow. Perfect. Plus, when the case is sitting under your desk, all the ports are the closest they can be to where you want them -- rear top of the case. I love the idea of having access to the back panel (now on top) of the case by just rolling the case out a bit. Lighting will be better, cables will not be strained and crimped around corners. Very convenient.
I hope other (cheaper) options appear with this configuration. I may have to consider picking one up.
Dreamwalker - Friday, February 6, 2009 - link
A very interesting case, but I do wonder how you manages the cables that are coming at the top, the VGA cables and all the other stuff. A picture would be great here. Can't realy imagine how it looks like all the cables coming at the top rather than from the bac side.Anyone got the Lamborghini Reventon in his minde when looking at he pictures?
weevil - Friday, February 6, 2009 - link
Looks like an F-117 Stealth fighter to me, Love the interier but the outside is ugly. But at least it will evade radar, I could replace the fairing on my Harley with this and the CHP will never see me.strikeback03 - Friday, February 6, 2009 - link
Personally, I think the person in the previous look who compared it to a Jawa Sandcrawler was dead-on.Bigjee - Friday, February 6, 2009 - link
That's the first thing that came to my mind.The lamborghini Reventon.
This case perfectly portrays it. The lines make it look like its been designed by the same person who designed that car.
soydeedo - Friday, February 6, 2009 - link
With dreadlocks.maxnix - Thursday, April 28, 2011 - link
Had this case two years now and it has been rock solid except for a bad fan that would rattle when installed. Replaced with an even quieter one and all is well. Not overclocked yet, so acoustic signature could increase when it is. Access is great and easy. Case is heavy.Now the Raven 3 is out.
By the way the filters while rudimentary, are a lot better than nothing in most other cases.