=<em>F-A-S-T</em>= DDR Memory: 2-2-2 Roars on the Scene
by Wesley Fink on August 5, 2004 12:05 AM EST- Posted in
- Memory
Performance Comparisons
Performance of the five DDR400 2-2-2 memories was compared to all of the memory recently tested on the Intel 875 memory test bed in:Buffalo FireStix: Red Hot Name for a New High-End Memory
New DDR Highs: Shikatronics, OCZ, and the Fastest Memory Yet
The Return of 2-2-2: Corsair 3200XL & Samsung PC4000
OCZ 3700EB: Making Hay with Athlon 64
OCZ 3500EB: The Importance of Balanced Memory Timings
Mushkin PC3200 2-2-2 Special: Last of a Legend
PMI DDR533: A New Name in High-Performance Memory
Samsung PC3700: DDR466 Memory for the Masses
Kingmax Hardcore Memory: Tiny BGA Reaches For Top Speed
New Memory Highs: Corsair and OCZ Introduce DDR550
OCZ PC3700 Gold Rev. 2: The Universal Soldier
OCZ 4200EL: Tops in Memory Performance
Mushkin PC4000 High Performance: DDR500 PLUS
Corsair TwinX1024-4000 PRO: Improving DDR500 Performance
Mushkin & Adata: 2 for the Fast-Timings Lane
Searching for the Memory Holy Grail - Part 2
Memory performance was compared at DDR400, DDR500 and the highest stable overclock we could achieve that would run Quake 3, UT2003, and Super PI to 2MM places. Where the data was available, comparisons were also made at DDR433 and DDR466.
All discontinued products have been removed from benchmark comparisons.
Results are compared for Quake 3, Sandra UNBufferred Memory Test, and Super PI. SiSoft Sandra 2004 reports 2 results for each memory test - an Integer value and a Float value. Results reported in our charts are the result of averaging the INT and FLOAT scores, which are normally close in value. In other words, INT and FLOAT scores were added and divided by 2 for our reported score.
47 Comments
View All Comments
Hasse - Friday, November 26, 2004 - link
Hi!I'm rather confused when I check my bios for all the abreviations.. TRC, TRAS.... it would be nice to know what to set them all to, I've got the Asus A8V Deluxe board.. and probably ain't the same bios view or settings that msi or others have. I've tried to overclock but the dang thing just hangs and creates not so funny looking bios boot images... Anyway thanx for a nice review. I've made my choice on memory based on it...
adamofwales - Thursday, November 11, 2004 - link
Quite easily, I must say,this is the BEST article about memory I have ever read.
Well done.
googles - Tuesday, October 19, 2004 - link
i cant find a crucial ballistix pc3200 @ 2-2-2-5 timings.according to their website,
http://www.crucial.com/ballistix/store/listmodule....
BL6464Z402 DDR PC3200 • 2-3-2-6 • Non-parity • DDR400 • 2.8V • 64Meg x 64
they only have a ddr400 ballistix @ 2-3-2-6, is this the ram that AT evaluated?
somekid617 - Thursday, September 23, 2004 - link
i got the ocz 3200 rev.2 and its great!somekid617 - Thursday, September 23, 2004 - link
mbor - Thursday, August 26, 2004 - link
#323Suns, 2-2-2-5 doesn't mean it takes 5 cycles every 4th fetch. The paramenters are:
CAS Latency-RAS to CAS Delay-RAS Precharge-Cycle Time (Tras).
The names actually vary depending on the source. I quote the names used in CPU-Z, as I think they're well establisheed. You should easily find the description of each of these in online references.
fritz64 - Monday, August 16, 2004 - link
babyelfPlease let us know your Optimum latency, memory speed and Voltage setting. I should receive mine today.
babyelf - Saturday, August 14, 2004 - link
Got my 3200 ballistix.. ran 2.65 at DDR410 at 2-2-2-11 and primed blend for 15 hoursnow running DDR420 at 2-2-2-11 at 2.7V
i'll try to go more later after i burn in at this speed
fritz64 - Friday, August 13, 2004 - link
#37 and #38I just ordered my 512MB x2 Crucial ballistix memory for my A64 3500+. I'm hoping to get 2-2-2-10@2.75V for at least 220MHz on Abit AV8 socket 939. I will let you guys know what I have later once I get my hands on those sticks. This will be an acid test for the information that we receive on Anandtech.
Fleabit - Thursday, August 12, 2004 - link
Wasn't so happy with my 2 * 512MB Ballistix either. couldn't get them to run dual channel stable at DDR 400 at 2-2-2-8 on an NF7-S v2.0 using the rated voltage.Memtested each of the dimms individually, at 2-2-2-8 @2.8v they max'd at 212 and 205.
At least crucial have a good RMA service :)
Has anyone had good experiences?