Final Thought
In the end, what really makes a good gaming chassis? We believe a worthwhile product should include a tool-less design, greater possibilities for expansion, ample drive bays, and regardless of any other feature, a removable motherboard tray. We mentioned earlier that gamers, more than any other end user, swap out hardware to keep up with changing technologies. This creates the need for a case that will allow them to do this without running into messy wiring or cramped space inside the case.Though Chenbro does not include many of these features in their Xpider II, its performance comes close to a great gaming chassis as far as heat and noise benchmarks go. Compared to the Thermaltake Damier V6000A, the Xpider II performed at just about the same level. It is surprising, since the Damier has three more fans than the Xpider II.
Click to enlarge.
The Xpider II's use of drive rails was also a great choice, but would have been even better had it been implemented in the bottom six 3-1/2" drive bays. And Chenbro's add-on card securing device was an excellent idea, but could be improved to work with the varying designs of add-on cards.
With the combination of these features, we conclude that the Xpider II is at par with the other mid-range themed cases, like the X-Mask and the Guardian, but a price tag of around $80 may seem a bit on the expensive side compared to those two.
Facebook
Twitter
RSS
33 Comments
View All Comments
Bladen - Thursday, August 19, 2004 - link
If you want a gaming case, look out for the Gaming Bomb II.I have a Gaming Bomb I and it is great.
However the Gaming Bomb II is a bit on the expensive side (first time Chenbro made Al case so the machines had to be retooled).
I think the Xpider II isn't that hot, but I have heard it doesn't look that bad in real view, but Iiiiii'd rather get a GB2.
Head over too http://www.chenbro.com.tw/PR/GBII.jsp and have a looksee.
hdavis01 - Thursday, August 12, 2004 - link
Call me old school but I would take a simple looking, basic, black/white case with sturdy construction over anything with thrills and frills surface features. I won’t flame you guys for reviewing these “flashy” type boxes but please review some of the quality cases with less outside eye candy and focus on ones with more internal detail and functionalities.More cases like the Ahanix X195 Knight reviewed back on 3/04 would be nice.
I believe that your more informed hardcore readers are much more interested in cases that are functional, quality driven structures that hold all our precious, expensive peripheral component pieces tightly and securely in place and cooled to the best possible levels.
Thanks!!
yelo333 - Thursday, August 12, 2004 - link
Umm...that $80 price tag is because of the actually usable power supply...Assuming you liked that look(I definitely DON'T), it doesn't look like it's THAT bad a deal, as you mentioned on the end of the last page.CrimsonDeath - Thursday, August 12, 2004 - link
If i was 10 and was crazy about spidey, then this &$^$%^ might have been my case. Other than that the desing is really mediocre and FUGLY if i may say so myself :) . C'mon show us some serious cases ppl.AnnoyedGrunt - Thursday, August 12, 2004 - link
I think you guys should add some additional criteria to your review. Things that come to mind are:1. How well do the USB and firewire port cables interface with the MoBo.
2. Does the firewire cable have a header for MoBo mounting or does it need to pass thru to the rear firewire port of the MoBo
3. Give extra points for rubber HDD isolators (to me this is a very nice feature that seems so simple yet is missing from many cases)
4. This case only has one removeable cover, which severly limits access to cable routing, I think that should be considered a negative.
5. Agree with the PSU points. At the minimum add a test with the standard PSU so the sound and capability of the stock case is known.
6. This last one may be more controversial, but to me the whole "tooless" trend is usually poorly implemented and makes things wose than cases with simple screws. In particular, drive rails that first attach to the drive and then snap in to the case seem pointless, and the PCI card snaps often don't work nearly as well as a screw. Personally, I would like to see more cases go with thumbscrews and I think you should make more mention of it in your review. It seems like the mechanical build up of a computer is quite small compared to the software installation and setup, and therefore I would like to see less emphasis placed on the build time and more emphasis placed on the ease of access and sturdiness once components are installed.
7. The looks of that case are....well, lets just say that if I had a 5 year old I think the kid would like it. Most others I think would find the looks "controversial" and I don't think anyone believes it has "gaming written all over it". Just IMO of course.
Anyway, nice review overall, but could use more details and I think stronger reaction towards some of the negatives of the case.
-D'oh!
AtaStrumf - Wednesday, August 11, 2004 - link
I build a bunch of PCs with chembro's gaming bomb, which uses the exact same design, but has a much more digestible front bezel:http://www.dinoxpc.com/Tests/ALTRE/ChembroGB/image...
It actually looks better in person, especially without the window in the side panel, so if you can't stand the spider-man bezel, you can allways go with the "gaming bomb".
Unlike some other cases we usually use, I really liked this one, my only gripe would be with the add-in cards holding mechanism, with feels a bit too flimsy.
ciwell - Wednesday, August 11, 2004 - link
That has to be one of the most visually offensive pieces of scrap metal I have had the displeasure of laying my eyes on.nessus - Wednesday, August 11, 2004 - link
Well, pretty much everything has been said. I just wish Anandtech would be honest with their opinions and not try to make the review as long as possible with rubbish. Do you guys ever look at the other review sites?? For instance take a peek at Dansdata. He doesn't have a very pretty site but I think it works and he's very honest about products he reviews...but that is only my oppinion.brian_riendeau - Wednesday, August 11, 2004 - link
"They have released a few gaming chassis in the past few years, which we have not had the pleasure to look at until now.""The front of the case is made up of a custom molded bezel, which gives it a look that says gaming all over it."
I think these two lines pretty much sum up the entire problem... AT is becoming totally disconnected from the users who come to this site.
Nazgoth - Wednesday, August 11, 2004 - link
Is it me or are new cases getting uglier and ulgier :/