Team XTreem TXDR 1024M400HC2
Team will be another new name to our readers, but the company already has a world-wide presence with manufacturing in Asia and US Sales Offices.
The Team Marketing group lavished quite a bit of attention on the heatspreader design for the Xtreem product line. The heatspreaders are 3 dimensional gold colored with a huge raised "X" and Team logo. The top of the heatspreader is completely open for better heat dissipation.
Specifications
The Team 2GB kit is another DDR400 rated memory kit, which, as expected, features Infineon chips.
As we have seen with all the new 2GB kits, high memory voltage is not required to get the most from the 2GB kits. Team also rates their kit at standard voltage, and we never required more than 2.8V to get the most performance from the 2GB kit.
Test Results
To be considered stable for test purposes, Quake3 benchmark, UT2003 Demo, Super PI, Aquamark 3, and Comanche 4 had to complete without incident. Any of these, and in particular Super PI, will crash a less-than stable memory configuration.
The DDR400 rating would lead us to believe that these are Infineon B die chips, and if they are, Team has done an excellent job in binning chips and designing their PCB and SPD. That's because Team Xtreem reaches the highest overclock that we have seen with a DDR400 rated 2GB kit.
Memory timings are what we would expect with a well-designed Infineon chip-based memory, and the Team overclocks all the way to DDR533. To repeat, this is the highest overclock in the roundup for a memory rated at DDR400.
The Team name may not be familiar to you, but you should definitely add Team to your shopping list. These are solid DDR400 Infineon DIMMs and if the price is right, you will not be disappointed in your new memory purchase. It is true that Infineon C die reaches a bit further if properly binned, but the difference between the TEAM at 533 and C die at 550 or higher is not that big. Other DDR400 rated Infineon DIMMs in this roundup often struggled to even approach DDR500 in their overclocks.
Team will be another new name to our readers, but the company already has a world-wide presence with manufacturing in Asia and US Sales Offices.
The Team Marketing group lavished quite a bit of attention on the heatspreader design for the Xtreem product line. The heatspreaders are 3 dimensional gold colored with a huge raised "X" and Team logo. The top of the heatspreader is completely open for better heat dissipation.
Specifications
The Team 2GB kit is another DDR400 rated memory kit, which, as expected, features Infineon chips.
Team XTreem TXDR 1024M400HC2 Memory Specifications | |
Number of DIMMs & Banks | 2 DS |
DIMM Size Total Memory |
1GB 2GB |
Rated Timings | 2-3-3-5 at DDR400 |
Rated Voltage | Standard (2.6V) Voltage |
SPD | 2-3-3-5 |
As we have seen with all the new 2GB kits, high memory voltage is not required to get the most from the 2GB kits. Team also rates their kit at standard voltage, and we never required more than 2.8V to get the most performance from the 2GB kit.
Test Results
Team XTreem TXDR 1024M400HC2 (DDR400) - 2x1GB Double-Bank | |||||||
CPU Ratio at 2.4GHz | Memory Speed |
Memory Timings & Voltage |
Quake3 fps |
Sandra UNBuffered | Sandra Standard Buffered |
Super PI 2M places (time in sec) |
Wolfenstein - Radar - Enemy Territory fps |
12x200 | 400DDR | 2-3-2-7 2.5V |
540.9 | INT 2502 FLT 2630 |
INT 6034 FLT 6018 |
82 | 117.9 |
11x218 | 436DDR | 2-3-2-7 2.7V |
545.0 | INT 2661 FLT 2825 |
INT 6462 FLT 6372 |
81 | 118.6 |
10x240 | 480DDR | 2.5-3-2-7 2.6V |
554.3 | INT 2853 FLT 3040 |
INT 6722 FLT 6650 |
81 | 120.2 |
9x267 | 533DDR | 3-3-2-8 2.8V |
558.0 | INT 3044 FLT 3247 |
INT 7003 FLT 6941 |
80 | 121.2 |
10x267 (2.67GHz) |
Highest Mem Speed DDR 533 |
3-3-2-8 2.8V |
590.9 | INT 3175 FLT 3388 |
INT 7868 FLT 7857 |
76 | 132.2 |
The DDR400 rating would lead us to believe that these are Infineon B die chips, and if they are, Team has done an excellent job in binning chips and designing their PCB and SPD. That's because Team Xtreem reaches the highest overclock that we have seen with a DDR400 rated 2GB kit.
Memory timings are what we would expect with a well-designed Infineon chip-based memory, and the Team overclocks all the way to DDR533. To repeat, this is the highest overclock in the roundup for a memory rated at DDR400.
The Team name may not be familiar to you, but you should definitely add Team to your shopping list. These are solid DDR400 Infineon DIMMs and if the price is right, you will not be disappointed in your new memory purchase. It is true that Infineon C die reaches a bit further if properly binned, but the difference between the TEAM at 533 and C die at 550 or higher is not that big. Other DDR400 rated Infineon DIMMs in this roundup often struggled to even approach DDR500 in their overclocks.
51 Comments
View All Comments
DonPMitchell - Monday, March 6, 2006 - link
I'm surprised there was no discussion of single-rank vs. dual-rank memory. For the Athlon, that's a big issue, becuase its memory controller may down-clock beyond 4 ranks of memory.nyogen - Wednesday, February 15, 2006 - link
I remember when Nvidia released their 6xxx series there was an all out boycott of paper launches.OCZ and Mushkin released not very long ago their 2GB dual channel high end kits namely:
http://www.mushkin.com/doc/products/memory_detail....">http://www.mushkin.com/doc/products/memory_detail....
http://www.ocztechnology.com/products/memory/ocz_e...">http://www.ocztechnology.com/products/memory/ocz_e...
Apart from these parts not having been available, the new batch that carries only the name given by reviews are flagged by poor performance, different IC's from the original batch, and lots of glitches.
I am sure Corsair and all the other manufacturers are doing the same, paper launch, hard launch cherry picked and then selling out to unsuspecting customers a COMPLETELY different product, backed by reputable reviews.
Don't you feel like they have been using you and used your reputation and popularity in order to commit something very close to fraud ???
If you encourage us to buy these products then you have the responsability to follow up on the products life and batches so that once they try to do this again you will be there to sanction this and PROTECT US. Otherwise your reviews become fairy tales and the only ones that have the reviewed products are you and a couple of people in the world.
GO FOR THEM ! END THIS UNFAIR PRACTICE !
Overlag - Monday, February 6, 2006 - link
Crucial have infact stopped making there 1gig DDRI sticks due to the massive fail rate on there high end products.i have had 6x 512mb failures and 4x 1gig failures. While there customer services is the best of ANY online company ive dealt with, there high end products are really bad quality now.... the ram overheats, then after a few months wont run at 1t, then it starts making noises while you access it, before finaly degrading over a month from 2-2-2-6 settings down to 3-4-4-10 untill failing totaly.
This includes chips (my latest two) which ive been using at 2.7volts ONLY, and with active cooling, yet they are still hotter than my X2 4400 at 4800 speeds...Last week they run fine at 2-2-2-7 1t, now they are at 3-3-3-8 2t :(
... Why there high end products have problems i dont know, there normal or value ram runs fine for YEARS and YEARS.
Very disapointed with it all apart from the customer services. However even that has started to disapoint me, as they refused to RMA/refund me for my 2x 512mb pair...
leexgx - Monday, February 6, 2006 - link
i had no problems getting my ram RMAed and replaced (2 days ago 2 day turn around UK) never had something replaced so fast before :)you can still buy it from here (UK tho)
http://www.overclockers.co.uk/acatalog/Crucial_Dua...">http://www.overclockers.co.uk/acatalog/Crucial_Dua...
on an other note it is an consern to me as well i have never used ram that can heat my room (needs active cooling) like others have posted it does run hot if not cooled i cant seem to get to 2-2-2-7 T1 my asus a8n-sli prem does an anoying thing by auto setting it to 4 5 5 12 {fail safe maybe?}(when i open A64 tweeker as it shows the info) then the nvidia Sound or nvidia video tray Icon crashs the system with an nice BSOD, (works fine tho at 3-3-3-7 T1 @ ddr500 2.7v or ddr speed lower but just run it at ddr400 ish now)
an but realy any way good OCZ or just standered TwinMoss ram is realy real world 2-4% performance dif (Amd64 On chip ram contorler removes the bottle neck that was on the Older k7 chips i go for lower timeings over more bandwith)
realy should have an look at DFI streets Forums on the matter of ddr1 Ocing (AMD overclocking) http://www.dfi-street.com/forum/forumdisplay.php?f...">http://www.dfi-street.com/forum/forumdisplay.php?f...
(other note i think my ram was partly dead when i got it just put up with it untill me pc did not boot any more )
Overlag - Thursday, February 9, 2006 - link
i wouldnt want to buy ballistix ever again... Once this set finaly gives up the ghost i will ask for a full refund and get some real memory.XeCutor - Thursday, February 2, 2006 - link
My first pair failed memtest at 250mhz, seemed stable at 247mhz. My second pair does 250mhz but not much more. Fails at 255mhz. All this is on a DFI Expert board with an opteron 165 3-4-4-8 1T timings at 2,6-2,8v. Voltage doesn't seem to matter att all to these sticks, they fail at the same speeds regardless for me.bupkus - Wednesday, January 25, 2006 - link
I went for the Twinx2048-3200c2pt because of the lower timings and $197 AMIR price. I haven't researched this much lately, but I recall PC3200 with tight timings getting the nod from the enthusiast community for the Athlon 64.The TWINX2048-4000PT that I faced it off to lists timings of 3-4-4-8 which I thought wasn't preferable to the tighter timings especially with a price of $233.
The OCZ4002048ELDCPE-K is going for the same price of about $200 but the OCZ5001024EBPE only appears on newegg as a single 1GB module for $153.44 + $4.81 shipping.
That's too rich for my blood.
I guess the question for me would be which is the best for $200 +- $20?
Visual - Wednesday, January 25, 2006 - link
Besides the TWINX kit, corsair offers single 1GB modules too - again marked as 4000PTThe price for the kits for some reason seems higher than two separate modules.
So my question is, are the separate modules the same thing as what's in the kits? Why don't you mention them at all, and either recommend them for better value over the overpriced kits, or, if they dont perform as well, warn users about them?
Googer - Tuesday, January 24, 2006 - link
I would have liked to have seen four 512MB modules shown in the graphs as a refrence of how much or how little there is to gain by using these pairs of 1GB modules. By doing this I could form a cost/benefit analasys.bersl2 - Monday, January 23, 2006 - link
I'm going to wait to see if the price on DDR1 falls again before AMD goes DDR2. If it does, I'll get 2 x 1GiB to replace the 4 x 512MiB I bought over a year ago, but haven't been able to use until just now.