The AMD X570 Motherboard Overview: Over 35+ Motherboards Analyzed
by Gavin Bonshor on July 9, 2019 8:00 AM ESTASRock X570 Creator
The ASRock X570 Creator is geared towards content creators with a similar feature set to the flagship ASRock X570 Aqua, but without the focus on high-end aesthetics, and water cooling. The X570 Creator has a simplistic and elegant theme with silver heatsinks, with black contrast.
Its X570 heatsink is actively cooled, and incorporates an M.2 heatsink, with a standalone heatsink for the top slot; the top M.2 slot supports PCIe 4.0 x4 and SATA, while the bottom slot is geared for just PCIe 4.0 x4 drives. For SATA there are a total of eight ports. On the PCIe front, there are three full-length PCIe 4.0 slots which run at x16/x8/x8, and x8/x8/x4, as well as three PCIe 4.0 x1 slots.
For memory, the ASRock X570 Creator has four slots with support for up to DDR4-4666 which remains to be seen if it will be effective or not in terms of performance. The X570 Creator also sports a 14-phase power delivery which is consistent with ASRock's other high-end offerings and has 8-pin plus 4-pin i12 V ATX CPU power inputs for delivering power to the processor. The feature set of the ASRock X570 Creator is similar to its other premium X570 models, but the main difference is primarily in the aesthetic. A cleaner, more professional look, without as much flash and pizazz. This mode has two PCIe 4.0 x4 M.2 slots, with a total of eight SATA ports with support for RAID 0, 1, and 10 arrays. A debug LED is located just below the X570 chipset heatsink, and next to these is an onboard power and reset switch.
With the ASRock X570 Creator being one of its more higher-end models, it has two rear panel Thunderbolt 3 Type-C ports. with an Aquantia AQC107 10 G LAN port, an Intel Gigabit port, Intel's AX200 802.11ax Wi-Fi 6 interface, and two USB 3.1 G2 Type-A, as well as four rear-panel USB 3.1 G1 Type-A. It also has two DisplayPorts with an input, and output, as well as one HDMI video output.
The ASRock X570 Creator comes in with an MSRP of $500 which for a premium feature set and everything on offer, it's not a bad price. There are other boards which cost slightly less with similar feature sets, but the Aquantia AQC107 10 G NIC, support for NVIDIA two-way SLI, and dual Thunderbolt 3 Type-C ports on the rear panel all add cost to the board.
Facebook
Twitter
RSS
225 Comments
View All Comments
DigitalFreak - Tuesday, July 9, 2019 - link
Agreed. The major differences between pricing in motherboards nowadays is how well they support overclocking, how many / what type of Ethernet ports, and how much RGB garbage they throw on there. :-)brunis.dk - Wednesday, July 10, 2019 - link
Retarded Garbage Blinking!29a - Wednesday, July 10, 2019 - link
RGB changes the price by pennies at the most.jrs77 - Tuesday, July 9, 2019 - link
If it wasn't for the optical digital output I'd agree, but these seem to be rather rare and not common at all. A couple years back that wasn't the case, so I see an actual backwards trend here that comes with a lack of necessary ports. Atleast an optical digital output is necessary for me.lmcd - Friday, July 26, 2019 - link
I mean sure, but a decent number of them were completely useless from a terrible onboard chipset. Pretty sure one of my two desktops had one that maxed out at 2.0 channel over optical digital output.Silma - Thursday, July 11, 2019 - link
This would have been true, but for the dearth of ThunderBolt 3 ports, needed for audio interfaces for example.lso the price of most of the boards is outrageous compared to their real added value, imho.
umano - Friday, July 12, 2019 - link
I agree with Silma, for example the great asrock x299 itx at launch had a price tag of 399, with 4 memory channel and sodimm slot and 3 nvme. Something's wrong, or the amd statement is false (most modern i/o), or the mb manufacturers did not get the best from x570regsEx - Friday, July 19, 2019 - link
I like it either. But back in days, top Intel's Asrock P67 Fatali1y Professional was priced at $120. For that price you were getting 16+2 phase power, cooling with a pipe 3 brand new Etron USB 3.0 controllers (USB 3.2 Gen 1), additional PCIe controller, best at the time Realtek ALC892 sound, 2 Realtek RTL8111 LAN controllers, additional Marvell SATA controller, Dr. Debug display, power and reset buttons, 3.5" front USB 3 panel, additional rear USB 3 bracket and SLI bridge in the box. That was first generation of motherboards of XMP profiles and new graphical AMI UEFI (return of graphical AMI BIOS after 15 years) etc etc. Just $120. Now to get similar set you have to pay at least $360. And for $120 you can only get some poor office board. And ASRock was cheapest of high end boards back then. Now it's most expensive.regsEx - Friday, July 19, 2019 - link
"best at the time Realtek ALC892 sound"I mean best of Realtek. Obviously there were Creative X-Fi.
Marlin1975 - Tuesday, July 9, 2019 - link
How soon before you can test the x570 boards? Really curious how pcie 3 m.2 cards perform in them with 2000 and 3000 series cpus. Does the new chipset help performance for 2000 cpus or even 3000 cpus compared to x470 and b450 boards?And any word on future mATX boards? Only 1 so far seems weird and also a monoply for asrock.