D-Link had one of the most exciting networking suites at CES 2015. The fact that they seem to be having the lead when it comes to adopting Broadcom's latest MU-MIMO solutions played a major role. Having been behind the hub for the Staples Connect product, they also have enough know-how to aggressively tackle the connected home market. Without further digression, we take a look at the various products that D-Link had on display at their CES suite.

The ULTRA Series of Routers

D-Link's revamped router lineup consists of three main products:

(a) DIR-890L AC3200: This is the standard XStream configuration from Broadcom with two sets of 5 GHz radios and one 2.4 GHz radio. Speeds of up to 1.3 Gbps on each 5 GHz radio and 600 Mbps on the 2.4 GHz radio justify the AC3200 tag. This model is shipping now for $310.

(b) DIR-885L AC3100: This is based on Broadcom's recently announced 4x4 MU-MIMO solution (BCM4366 + BCM47094). The maximum WLAN PHY rate is 2165 Mbps for the 5 GHz band and 1000 Mbps for the 2.4 GHz band.

(c) DIR-895L AC5300: This combines the Broadcom 4x4 MU-MIMO solution with the XStream concept - putting 2x 4x4 MU-MIMO capable radios together gives 2.1 Gbps on each of the 5 GHz bands along with 1 Gbps on the 2.4 GHz band to justify the AC5300 name.

D-Link is also set to launch a 3x3 802.11ac USB Wi-Fi adapter in the DWA-192/R. Obviously, with the AC1900 rating, it supports connection via USB 3.0 for maximum performance. Pricing for everything other than the DIR-890L is yet to be decided. Shipping is slated for Q2 2015.

The industrial design of all the products in the ULTRA series is quite striking. It is definitely fitting for the revamp considering that D-Link effectively was an also-ran for the previous two generations of 802.11ac products.

Powerline Networking

On the PLC front, D-Link is again at the forefront with one of the highest performing powerline kits in the market. The PowerLine AV2 2000 (DHP-701AV) Gigabit starter kit is based on the Broadcom BCM60500 HPAV2 MIMO chipset.

D-Link also updated their AV2 1000 DHP-601AV product. Unlike the DHP-701AV, this is not MIMO-capable. Both products are scheduled to launch this quarter, with the kits coming in at $130 and $80 respectively.

The Smart Home Play

As I mentioned in the introduction to this piece, D-Link has been accumulating expertise in the connected home market, thanks to being the hub manufacturer for the Staples Connect program. The Smart Home is an interconnection of automation, entertainment and security aspects in a typical house. In order to tackle this market, D-Link is having two plays in mind - DIY security kits and a set of Wi-Fi / Z-Wave sensors along with a hub for the DIY home automation market.

The DIY security kit comes in two flavours - the HD edition and the HD Pan and Tilt Edition.

The kits come with a motion sensor, a smart switch (the one that D-Link has been shipping for about a year now) and a HD IP camera (with pan and tilt capabilities in the latter edition). The IP camera in the first package (HD edition) is the DCS-935L capable of recording H.264 clips at 720p30. It is one of the first 802.11ac-capable IP cameras that I have seen in the market.

The mobile apps ecosystem for the above kit is the same as that for the DIY home automation kit. The IP cameras have their own ecosystem with the mydlink Cloud - recordings get uploaded when motion is detected. Fortunately, local storage with a D-Link NVR is also possible.

The DIY Security Kit - HD Edition (DCH-101KT), DIY Security Kit - HD Pan & Tilt Edition (DCH-301KT) and the HD Wi-Fi Camera (DCS-935L) will go on sale later this quarter with pricing set at $190, $230 and $120 respectively.

The home automation play from D-Link is quite strong this year. At the heart of the ecosystem is the Connected Home Hub (DCH-G020 - Q2 2015 - $80) which acts as a Wi-Fi / Z-Wave bridge with a wired connection to the router. It is AllSeen compatible. Two Z-Wave sensors (Open/Close - DCHZ110 - Q2 2015 - $40 and Motion Sensor - DCH-Z120 - Q2 2015- $50) and two Wi-Fi sensors (water sensor - DCH-S160 - Q2 2015 - $60 and siren - DCH-S220 - Q2 2015 - $50) round out the lineup. The mydlink Home App controls all these devices, sets rules and allows creation of scenes - the typical home automation play.

My only complaint as a power user / person who likes to tinker around is that the ecosystem is closed - It is not currently possible, for example, to even control the Wi-Fi Smart Plug with the Logitech Harmony Home Automation hub.

The last two years have been a bit quiet for D-Link. So, it was great to see them bouncing back with very interesting products. My only wish is for them to recognize the value of a open home automation platform. On the router side, shipping the AC5300 DIR-895L in Q2 would definitely bring D-Link back in contention as a market leader.

Comments Locked


View All Comments

  • repoman27 - Tuesday, January 13, 2015 - link

    Hmmm... Both the DIR-885L AC3100 and DIR-895L AC5300 routers appear to not actually support 160 MHz channels. 2167 Mbit/s would be the PHY rate for 4 spatial streams, 80 MHz channels, with (proprietary) 1024-QAM, 5/6 coding rate, and 400 ns guard intervals. With conventional 256-QAM, it would be 1733 Mbit/s. Is this due to D-Link's implementation, or does BCM4366 not really do 160 MHz the way Broadcom might lead you to believe in their press release? The info they have provided thus far is pretty sketchy.

    And has any 4x4:4 client silicon announced yet? With either 80 MHz channels and 1024-QAM or 160 MHz channels and 256-QAM we might be looking at peak TCP throughput in the range of 1 - 1.5 Gbit/s. That would be pretty righteous.
  • ganeshts - Tuesday, January 13, 2015 - link

    I covered that aspect in the Wi-Fi silicon (Quantenna Maintains Technology Lead..) article.

    It does support 160 MHz channels, just like the Marvell chipset.

    However, having 4 spatial streams doesn't mean that they need to be able to talk to another client with 4 spatial streams at the same time. For a better explanation, look at the Marvell datasheet here: http://www.marvell.com/wireless/assets/Marvell_Ava...

    "The 88W8964 supports three 1x1 or a mix of 2x2 and 1x1 connections at the same time." Broadcom must be doing something similar - the PR is indeed sketchy about the supported combinations. However, they did confirm that they support contiguous as well as discontiguous 80MHz + 80MHz channels.
  • repoman27 - Tuesday, January 13, 2015 - link

    Right, but that's so not how these guys roll when it comes to the advertising numbers for APs. They generally just add the maximum PHY rate that each of the radios support together to get the biggest possible number. There are no clients that support 600 or 1000 Mbit/s on 2.4 GHz besides other APs when configured as STAs or for WDS, but they happily add those numbers to whatever the 5 GHz radio(s) can muster to get the highest possible AC[large integer] number that they can print on the box. I have to imagine that the 4 / 8 antennae aren't there just for show, so these really are utilizing 4 spatial streams per radio, which means that true 160 MHz channels probably aren't happening. Perhaps the XStream configuration "enables 160MHz aggregation" and supports "contiguous as well as discontiguous 80MHz + 80MHz channels" by using 80 MHz channels on both 5 GHz radios simultaneously.

    Any input, gurkha1?
  • repoman27 - Tuesday, January 13, 2015 - link

    Sorry, if I was paying attention I would have noticed that there *is* AC1900 client hardware available now. But my point stands on the 1000 Mbit/s, 2.4 GHz business.
  • zodiacfml - Wednesday, January 14, 2015 - link

    They probably did not add the DFS feature, making 80MHz the widest possible
  • ganeshts - Tuesday, January 13, 2015 - link

    As for 4x4:4 client silicon - none as of now. We are basically looking at something implemented in mini-PCs or a USB 3.0 WLAN adapter - for mobile / notebook, I would assume the power demands are just too high. Will definitely keep a lookout and report when there is any progress in this area from the silicon / product vendors.
  • Mr_Nomad - Tuesday, January 13, 2015 - link

    So I hear Google Fiber is interested in those Ultra Series routers from D-Link. (I know a couple individuals from the Fiber division) D-Link would be crazy to not take that opportunity.
  • gurkha1 - Tuesday, January 13, 2015 - link

    Definitely interested--- I work in D-Link product management but can get the BD team to follow up with Google Fiber Division. Let me know the best way to communicate outside the forum.

Log in

Don't have an account? Sign up now